Эпоксидный раствор влагостойкий пол устойчивый к тяжелым давлению Epomota
- Категории: Mortar >>>
- Поставщик: CHANYE,CHEMICAL,INDUSTRY,CORPORATION
Поделиться:
Описание и отзывы
Характеристики
Product Description
Product Description
Chanye-epomota 6500 is a three- part, water-based epoxy resin mix cement.
Chanye-epomota 6500 is a high-strength and self-leveling underlayment. It’s convenient and easy to use. It provides a smooth, level surface on which to install a variety of floor coverings.
Chanye-epomota 6500 is a three- part, water-based epoxy resin mix cement.
Chanye-epomota 6500 is a high-strength and self-leveling underlayment. It’s convenient and easy to use. It provides a smooth, level surface on which to install a variety of floor coverings.
Uses
Chanye-epomota 6500 is well-suited for flattening, smoothing and repairing factory, residential and commercial floors before the installation of final floor coverings.
Advantages
▪ Self levelling
▪ Easy application
▪ Good compressive strength
▪ Environmentally friendly
▪ Cures to provide a flat, hard, smooth surface to receive a variety of floor- covering materials
Chanye-epomota 6500 is well-suited for flattening, smoothing and repairing factory, residential and commercial floors before the installation of final floor coverings.
Advantages
▪ Self levelling
▪ Easy application
▪ Good compressive strength
▪ Environmentally friendly
▪ Cures to provide a flat, hard, smooth surface to receive a variety of floor- covering materials
Technical Information
Test Items | Test Required Value |
Compressive Strength (28 days) | >400 kgf/ cm² |
Flexural Strength (28 days) | >65 kgf/ cm² |
Consumption
1.8~2 kg/mm/m²
1.8~2 kg/mm/m²
Note: This figure is theoretical and does not include for any additional material required due to surface porosity, surface profile, variations in level and wastage etc.
Application instructions
Application instructions
Mixing
▪ Chanye-epomota 6500A and Chanye-epomota 6500B mixed at weight ratio of 1:1.
▪ Mix with a high-speed drill (> 650 rpm) and an egg beater style mixing paddle to blend for approximately 1~2 minutes, until to minimize entrapped air and uniform mix has been produced.
▪ Pour 3.7~4 kg of clean, cool potable water into the mixing container, ensuring strict control of the water content (do not over-water).
▪ Add 25 kg Chanye-epomota 6500C to the mixing container, while slowly mixing, adding the complete contents of the bag.
▪ Mix with a high-speed drill (> 650 rpm) and an egg beater style mixing paddle to blend resin and powder for approximately 2~3 minutes, until a lump-free and uniform mix has been produced.
Note: Operating time: 10 ~ 15 minutes (temperature: + 15 ° C(+59°F) ~ + 35 ° C(+95°F))
Application
▪ Pour the mix and spread evenly, and control the material thickness by scrape rake.
▪ Even surfaces by smoothing trowel.
▪ Roll immediately with a spiked roller to ensure even thickness and achieve defoaming effect.
▪ Chanye-epomota 6500A and Chanye-epomota 6500B mixed at weight ratio of 1:1.
▪ Mix with a high-speed drill (> 650 rpm) and an egg beater style mixing paddle to blend for approximately 1~2 minutes, until to minimize entrapped air and uniform mix has been produced.
▪ Pour 3.7~4 kg of clean, cool potable water into the mixing container, ensuring strict control of the water content (do not over-water).
▪ Add 25 kg Chanye-epomota 6500C to the mixing container, while slowly mixing, adding the complete contents of the bag.
▪ Mix with a high-speed drill (> 650 rpm) and an egg beater style mixing paddle to blend resin and powder for approximately 2~3 minutes, until a lump-free and uniform mix has been produced.
Note: Operating time: 10 ~ 15 minutes (temperature: + 15 ° C(+59°F) ~ + 35 ° C(+95°F))
Application
▪ Pour the mix and spread evenly, and control the material thickness by scrape rake.
▪ Even surfaces by smoothing trowel.
▪ Roll immediately with a spiked roller to ensure even thickness and achieve defoaming effect.
6 months from date of production if stored properly in original, unopened and undamaged sealed packaging.
Storage Conditions
Store dry at +5°C(+41°F)~+35 °C(+95°F) Protect from moisture, direct sunlight, flame sources and freezing.
Technical data sheet(TDS)
Company Profile
Our Advantages
◆Professional
Specializing in chemical materials for 24 years.
◆Quality
With stable and high product quality.
◆Service
Professional team to provide service.
◆Performance Cases
Rich experience and a lot of actual performance cases.
◆R&D
Strong R&D team, constantly developing new products.
Specializing in chemical materials for 24 years.
◆Quality
With stable and high product quality.
◆Service
Professional team to provide service.
◆Performance Cases
Rich experience and a lot of actual performance cases.
◆R&D
Strong R&D team, constantly developing new products.
Exhibition
Packing & Delivery
FAQ
Похожие товары
Новий тип цемента с хорошим адвекции свойствами и цемента
US $0.25-$0.55
BYGM-80 быстрое затвердевание цемент наливных cememt
US $0.45-$0.99
Новинки - Розница
