RFD900X металлический корпус большой радиус действия телеметрический модуль более 40 км для контроллеров APM/ pixhawk/
- Категории: >>>
- Поставщик: Shenzhen,Lucy,Raul,Trading,Co.,Ltd.
Поделиться:
Описание и отзывы
Характеристики
Product Description
Weight | 14.5g |
Dimension | 30mmx57mmx12.8mm |
Operating temperature | -40 to 85°C |
Frequency Range | 902 – 928 MHz (USA) / 915 – 928 MHz (Australia) |
Output Power | 1W (+30dBm), controllable in 1dB steps ( +/- 1dB @=20dBm typical ) |
Air Data transfer rates | 4, 8, 16, 19, 24, 32, 48, 64, 96, 128, 192 and 250, 500 kbit/sec ( User selectable, 64k default ) UART data transfer rates: 9600, 19200, 38400, 57600, 115200, 400k, 921k baud ( User selectable, 57600 default ) |
Output Power | 1W (+30dBm) |
Receive Sensitivity | >121 dBm at low data rates, high data rates (TBA) |
Size | 30 mm (wide) x 57 mm (long) x 12.8 mm (thick) – Including RF Shield, Heatsink and connector extremeties |
Weight | 14.5g |
Mounting | 3 x M2.5 screws, 3 x header pin solder points |
Power Supply | +5 V nominal, (+3.5 V min, +5.5 V max), ~800 mA peak at maximum power |
Temperature Range | -40 to +85 deg C, tested operational from -73 to +123 deg C. |
Compliance :
The RFD900 is designed to be compliant with the following standards:
FCC Part 15.247 (Frequency hopping and digitally modulated intentional radiators)
AS/NZS 4268:2012 (Radio equipment and systems – short range devices)
The modem is designed for system integrators who will integrate the modem into their own projects and product prototypes. The user
is responsible for compliance with local regulations for radio transmitters.
Software / GCS Support:
* The software solution is an open source development called “SiK”. It has been re implemented to suit the new processor
architecture available on the 32bit ARM processor core. A boot loader and interface is available for further development and
field upgrade of the modem firmware via the serial port.
* Most parameters are configurable via AT commands, Eg. baud rate (air/uart), frequency band, power levels.
* Integrated support for configuring the RFD900 radios is supported by APM Planner.
* The default settings are at 57600 baud, N, 8, 1, and 64k air data rate.
The RFD900 is designed to be compliant with the following standards:
FCC Part 15.247 (Frequency hopping and digitally modulated intentional radiators)
AS/NZS 4268:2012 (Radio equipment and systems – short range devices)
The modem is designed for system integrators who will integrate the modem into their own projects and product prototypes. The user
is responsible for compliance with local regulations for radio transmitters.
Software / GCS Support:
* The software solution is an open source development called “SiK”. It has been re implemented to suit the new processor
architecture available on the 32bit ARM processor core. A boot loader and interface is available for further development and
field upgrade of the modem firmware via the serial port.
* Most parameters are configurable via AT commands, Eg. baud rate (air/uart), frequency band, power levels.
* Integrated support for configuring the RFD900 radios is supported by APM Planner.
* The default settings are at 57600 baud, N, 8, 1, and 64k air data rate.
Company Introduction
MotioNew is your place to find innovation, latest technology, and cool ideas. You can ignite your Newest Motions starting here. We are a group of experts who you can consult for your next Motion in design and engineering of your next project. Whether it is a professional job or a DIY, we are here to support you. In all situations, we are here to support you, in all stages of your project, starting from helping you to design your system, extending to buying the parts, packing them, and than shipping them to you, and beyond that to after sale services.
Похожие товары
Новинки - Розница
