Главная
Все Категории
Решетки для барбекю
Гриль из нержавеющей стали марки AISI 304 для пищевых продуктов тарелка барбекю 4 мм

Гриль из нержавеющей стали марки AISI 304 для пищевых продуктов тарелка барбекю 4 мм

Категории: Решетки для барбекю >>>
Поставщик: Tianjin,Teda,Ganghua,Trade,Co.,Ltd.

Цена:2 500,00 $ - 2 700,00 $*

Стоимость в USD (на сегодня):Узнать

Количество:

Описание и отзывы

Характеристики

Contact： Sandy Wei

Whatsapp : +86 13820192517 (Wechat)
Email: sandy(at)tedaganghua.com

Products Description

food grade AISI 304 grill stainless steel bbq plate 4mm 5mm

Stainless steel plate is smooth and has high plasticity, toughness and mechanical strength, and is resistant to corrosion by acids, alkaline gases, solutions and other media. It is an alloy steel that does not easily rust, but it is not absolutely not rusty.

According to the organizational structure, it is divided into four categories:

austenitic stainless steel plate,

martensitic stainless steel plate (including precipitation hardening stainless steel plate),

ferritic stainless steel plate,

and austenitic plus ferritic duplex stainless steel plate.

The main chemical composition or some characteristic elements in the steel plate are classified into

chromium stainless steel plate,

chromium nickel stainless steel plate,

chromium nickel molybdenum stainless steel plate,

low carbon stainless steel plate,

high molybdenum stainless steel plate,

high purity stainless steel plate,

According to the performance characteristics and uses of steel plates, it is divided into

nitric acid resistant stainless steel plates,

sulfuric acid resistant stainless steel plates,

pitting corrosion resistant stainless steel plates,

stress corrosion resistant stainless steel plates,

high strength stainless steel plates

According to the functional characteristics of steel plates, it is divided into

low temperature stainless steel plates,

non-magnetic stainless steel plates,

free-cutting stainless steel plates,

superplastic stainless steel plates,

The commonly used classification method is based on the structural characteristics of the steel plate and the chemical composition of the steel plate and the combination of the two. Generally divided into

martensitic stainless steel plate,

ferritic stainless steel plate,

austenitic stainless steel plate,

duplex stainless steel plate

precipitation hardening stainless steel plate

chromium stainless steel plate and nickel stainless steel plate.

Typical applications: heat exchangers for pulp and paper equipment, mechanical equipment, dyeing equipment, film processing equipment, pipelines, materials used for building exteriors in coastal areas, etc.

Stainless Steel Grade

201	202	304	304L	309S	310S	316L	316Ti
317L	321	347	304H	316H	347H	410	410S
420J1	420J2	429	430	431	434	436	439
441	443	444	445	446	2205	2304	2507
904L	17-4PH	630	F51	F53	F55	F60	321H
S32205	S32304	S32750	S34709	S32109	S31703	S31635	S31603
S31050	S31008	S31009	S30909	S30908	S30409	S30403	S30400
N08904	S20100	S20200	800H	N08810	N08800	301	S30100

Standard Size of Stainless Steel Sheet

1220X2440 MM	1500X3000MM	1500X6000	1000X2000	2000X6000
4 X 8 FT	5 X 10 FT	5 X 20 FT	914X2000	1800X6000
4‘ X 8'	5' X 10'	5' X 20'	1000*Coil	1500*Coil
48 " X 96 "	60" X 120 "	60" X 240 "	1800*Coil	2000*Coil

4X8 ft 3mm 316 perforated stainless steel sheets for wall panel

Stainless Steel Surface / Finish :

No.4	It has good gloss and fine lines on the surface. Processing technology: Polishing and tempering rolling of 2D products or 2B with 150 ~ 180 abrasive material (JIS R6002).
HL	It is silver-gray with hair streaks. Processing technology: Polish the 2D product or 2B product with a suitable size of abrasive material to make the surface appear continuous grain.
8K	It is in a mirror state. Processing technology: 2D or 2B products are ground and polished to a mirror effect with a suitable abrasive material.
2B	It is silvery white and better gloss and flatness than 2D surface. Processing technology: hot rolling + annealing shot peening pickling+ cold rolling + annealing pickling + quenching and tempering rolling.
BA	The surface gloss is excellent and has a high reflectivity, just like the mirror surface. Processing technology: hot rolling +annealing shot peening pickling + cold rolling + annealing pickling + surface polishing + quenched and tempered rolling.
1D	surface has discontinuous particles, also known as matte. Processing technology: hot rolling + annealing shot peening pickling +cold rolling + annealing pickling.
2D	It is slightly shiny silvery white. Processing technology: hot rolling + annealing shot peening pickling + cold rolling + annealing pickling.
No.3	has better gloss and rough surface. Processing technology: Polishing and tempering rolling of 2D products or 2B with 100 ~ 120 abrasive materials (JIS R6002).
SB	The surface is smooth, the texture is clear, the texture is delicate, the appearance is comfortable, and the taste is high-grade.It is widely praised by consumers especially in kitchen appliances.