Китайская фабрика самоклеящаяся бутиловая водонепроницаемая мембрана по заводской

Description

RGM-SA-BR Self-adhesive Butyl Rubber waterproof membrane is made of Buytl Rubber coated aluminum film,using the latest patented technology, through a special process produced by the environment-friendly solvent-free sealing adhesive material.It is a quick and effective method of sealing and repairing that produces a lasting protection in all climates.

Materials Consist    

*Upper surface and release paper can be customized.

*Aluminum foil has excellent aging, weathering and UV resistance, available for various of sites, especially for exposed application. HDPE film has excellent tension and elongation, especially for various underground projects, such as pipe, basement, tunnel and so no.

Colorful AL foil                                          Blue HDPE film                                             Black HDPE film  

Specification

*The thickness, width and length can be made based on customers’ requirements.

* Single side adhesive and double sides adhesive can be made.

Features and Benefits

1)Excellent mechanical properties: high bonding strength and tensile strength, good elasticity and extension performance, strong adaptability to the shape change and crack of the interface, and good ability to trace the shape change of the substance.

2) Stable chemical properties: It is equipped with excellent chemical resistance, weather fastness, and corrosion resistance.

3) Reliable application performance: excellent binding property, water resistance, leak tightness and low-temperature resistance, and high stability in size.

4) Environment friendly: butyl rubber membrane is harmless to human body and environment.

Application Range

1. Various industrial and civil building roofing projects.

2. Various industrial and civil building underground projects.

3.  Subways, tunnels, concrete pavement decks, sewage treatment sites, and landfills, etc.

Surface preparation

Surfaces to be constructed must be clean, structurally sound, dry and free from dust, dirt, oil,  rust and loose material. Smooth non-porous surfaces such as metals and plastics should be degreased with a solvent such as acetone or thinners. Poor surface preparation may result in lifting and delamination of the membrane.

Installing Guideline

l Ensure that surfaces are prepared as above.

l Unroll the membrane and measure the correct length for the area to be constructed.

l If the weather is cold, allow the membrane to warm in the sun before application.

l Peel the release paper back from one end and press the membrane firmly onto the surface.

l Removing the backing membrane as you proceed.

l Press firmly onto the surface.The membrane must be overlapped at the edge by at least 5-8cm and on the top by at least 15cm.

l For a smooth finish, press membrane with a rubber hand roller, working from the center outwards, remove any air bubbles and creases ensuring firm contact is made with the surface.

l The aluminium foil backing must not be removed.

Packing and Delivery

l Each self-adhesive membrane is packaged in a paper carton box or packed in a pallet