Инкубатор для аквариума «сделай сам» инкубатор рассола креветки рыбы

1. 
   

   Brine shrimp hatchery

   
   

   This set of tool is specially designed for shrimp hatching.
   Professional,simple devices,convenient to use.
   DIY hatching equipment,you can use it to help shrimp hatching.
   Reusable,durable and easy to install.

   
   

    

   
   

   Advantage:

   
   

   1. Hanging incubator need more space, tilt will affect the hatching rate and doesn’t look good. Our Brine shrimp hatchery more easy diy, it directly stuck to the tank wall, it’s fit 3-10mm thickness tank, no harm to the tank.

   
   

   2. Our brine shrimp hatchery hatching rate above 95%

   
   

   3. We offer full tools, you can DIY Brine shrimp hatchery very easily

   
   

    

   
   

   Brine shrimp hatchery situation:

   
   

   1. Sea salt, fresh water is not good for shrimp live

   
   

   2. Light, hatchery need lighting

   
   

   3.25 to 28 ℃ is the best temperature for hatchery, if the temperature is too high or too cold, it will effect the hatching rate.

   
   

   4. Enough air supply promote the shrimp incubation

   
   

    

   
   

   Collect the shrimps:

   
   

   Provide the suitable environment, put the masking film and stop air supply 15 minutes, brine shrimp will go to the bottle bottom as phototaxis, you can see the live shrimps, shells will rise to the surface. It’s easy to collect the shrimps.

   
   

    

   
   

   Wash the salt by clean water, and then collect the shrimps into the storage bottle freeze in the refrigerator, and then you can feed your fish at any time.

   
   


2. 
   

   100% brand new and high quality

   
   

   Features:
   This set of tool is specially designed for shrimp hatching.
   Professional,simple devices,convenient to use.
   DIY hatching equipment,you can use it to help shrimp hatching.
   Reusable,durable and easy to install.

   
   

    

   
   


3. 
   

   Hatch steps:
   1. A Groove that is suitable for the fish tank thickness is installed at the pedestal.
   2. 1.5L water bottles prepared are taken out and cut the bottle bottom,about 3cm High.
   3.Twisted the bottle on the pedestal.
   4.Find the air pipe and cut into two 4cm short air pipes.
   5. One short air pipe connected on pedestal and airflow regulating valve,another short air pipe connected on airflow regulating valve and check valve.
   6.a water flow valve is installed on the rest air pipe and connect on the pedestal.
   7.take out the sticker of scale and paste it on the bottle.
   8.directly installed to the wall of fish tank.
   9.Pour 1200ml water into the bottle.
   10. Add 2 spoon sea salt and 1.5 spoon shrimp egg.
   11. connected the air pump(air pump not including)Keep air pump working on 24 hours ,fully increase oxygen (keep the water temperature in 25-28 Celsius)
   12.Use the manual and make it to be a lens hood and cover on the bottle.

   
   

    

   
   


4. 
   

   Collect steps:
   1. closed the regulating valve and oxygen pump.
   2. Wait 15 minutes
   3. According to the photokinesis of brine shrimp,after hatching, brine shimp will assemble at the bottom part of the collect cup, at the same time, egg shell will float on the top.
   4. Ready to collect shrimp eggs on the storage box.
   5.filter brine shrimps eggs and use clean water to wash down the saline.
   6.Use the sucker to suck up the brine shrimp eggs and put into the special storage box and cryopreservation.

   
   

    

   
   


5. 
   

   Specification:
   Stop clip×1
   Simple feeder×1
   Special measuring spoon×1
   Small measuring cup×1
   Water bottle connection base×1
   Patch1mm×1
   Fish tank wall card slot ×3
   Hose ×1
   Straw ×1
   Harvest Year Shrimp Storage Box×1
   Check valve ×1
   Gas volume control valve ×1
   Storage bucket (shrimp bucket)700ml ×1
   Shade cover(instruction) ×1
   Sticker ×1

   
   

   Package includes(with retail package):
   1 Set x Hatching Tool

   
   

1: Are you a factory or only a trading company?
We have factory to produce aquariums accessories.

2: Why we can choose you?
1): Reliable---we are the real company, we dedicate in win-win
2): Professional---we offer the accessories of aquariums exactly you want
3): Factory---we are a factory, we offer high quality and best price.

3: How about the shipping cost?
If your goods is not large, we can send goods to you via counier, such as FEDEX, DHL,we cooperated with them for long time, so we have good price.If your goods is large, we will send to you via sea, we can quote the price to you, then you can choose whether use our forwarder or yours.

4:How about the price?Can you make it cheaper?
The price depends on the item your demand(Shape,size,quantity)
Beat quotation after receving full description of the item you want.

5:How about the sample time?What is the payment?
Sample time:about 3~7days after order & samples confirmed.
T/T,30% deposit, and balance is after the order is finished. Also we accept the west union or moneygram or through by trade assurance in Alibaba.