Product Description
Log washer is mainly used to wash the manganese ore, iron ore, phosphate and other minerals, it is usually used to clean and separate the silt and stains from manganese ore, iron ore and other low-grade mineral.
This machine drive the spiral stirring shaft depends on speed reducer and rotate in different directions, and the minerals which enter the tank were washed by water and stir strongly by blade. The sewage was overflowed at the end of tank, the cleaned minerals were lifted up along the blade and discharged at the beginning of tank .
Features:
Large capacity, convenient installation, simple operation, low cost, high efficiency.
Log Washers ideal for scrubbing difficult materials such as tough insoluble clays, conglomerates, soft stone and cemented aggregate.
High capacity
Replaceable heavy duty conveying paddles
Fabricated with heavy duty shafts
Oversize bearings and gears
Thick-walled shafts
Lower end bolted to fully machined stub shaft. Upper end mounted through flexible coupling to output shaft of gearbox
The compound drive divides the operating load over an optimal combination of oversized helical and spur gears
Continuous grinding and abrading log washer paddles
Adjustable water discharge gates on both sides of lower end of the tub.
Working Principle
When the sand washing machine(log Washer) is running, the motor drives the impeller slowly turning through the belt, reducer, after the gear reduce the speed, sand and gravel are washed into the tank to the trough and driven by the the impeller, with tumbling and grinding each other to remove sand and gravel covered the surface of the impurities, while damages to the water vapor coated layer of sand to facilitate dehydration; at the same time, adding water to form a strong water flow, timely brings small proportion of impurities and foreign matter away and discharged from washing exports of the overflow tank, then finish the cleaning action. The cleaned sand and gravel are brought away from the blade, and finally poured into the out trough by the rotation of the impeller, and then finished the cleaning process.
Company Information
Shicheng Changyi mining machine equipment manufacturing established in 1958,located in Ganjiang River source and Wuyi mountain,is a professional supplier in producing and sale kinds of bearing bushes and mining equipments
We produce high precise vibrating feederJaw crusher,Hammer crusher,Vibrating screen,spiral classifier,ball mill,belt conveyor,shaking table,centrifugal concentrator,spiral chute,jig machine,flotation cell,magnetic separator,rotary scrubber,gold trommel screen,lab mining equipment etc.
Our Company won the reputation of "Jiangxi High Quality Products".
Our Services
We provide 12months quality warranty to make sure gravity machine well runs consistently.
Pre-sale services:
a. Professional engineer design the production line for you.
b. Recommend suitable equipment according to your special demand.
During-sale services:
a. Pre-check and accept products before delivery.
b. Send technicians to the jobsite for guiding the installation and adjustment.
c. Training operators and finishing the check to satisfy your requiremnet.
After-sale services:
a. Common problem can be solved through web in 24 hours,complex problem can be reacted immediately in 24 hours and solved as soon as possible.
b. To establish long-term friendship, we will regulary contact with our customers.
Contact info
Please feel free to contact me online or by email/phone!
Xiaoan Liao
Mobile/wechat/whatsapp/skype: 0086 151 7075 0797
Jiangxi Changyi Mining Machinery Co., Ltd
