Поделиться:
Title: | Vmanx Custom 0.125Mm-0.188Mm Thickness Bus Seat Pressure Sensor Car Seat Occupancy Sensor Seat Belt | |
Attribute Parameter | ||
Operating Voltage: | Min 0/Max 5.5V | |
Working Current: | Min 0/Max 50mA | |
Peak Current: | Min 0/Max 100mA | |
Non Triggering Resistance(non load): | Min 10.0K/Max ∞Ω | |
Trigger Resistance(carrying human body): | Min 0/Max 100Ω | |
Insulation Resistance(no load): | Min 10/Max 20MΩ | |
Technical Parameter | 1. Heat flow analysis, design and development. | |
Tevture of Material: | PET | |
Material Surface Thickness: | 0.125~0.188mm | |
Output Signal: | Resistance<100Ω | |
Film Thickness: | 0.4~0.65mm | |
Gum Back: | 3M Glue | |
Ambient Temperature: | -40℃~+80℃ | |
Persistence: | >200000 | |
Special Test Weight | ||
Single Point Pressure Range: | <50g 100%Non Conductive | |
Single Point Pressure Range: | >200g 100%Conductive | |
Connector: | According To Customer Requirements | |
Application Program: | Safety Belt Reminder(SBR) Taxi Automatic Message Accounting System Sensors For Airbags Medical Bed Massage Chair Office Chair | |
Usage Method : |
1.Double sided release paper facing down ; |
2.Tear off the double-sided adhesive release paper on the back of the sensor and align it with the installation position. It should be flat and laminated without foaming or wrin kling. It should be installed to the installation position accurately and evenly ; |
3.The connection harness is connected to the signal output port through the seat harness hole. |