Поделиться:
Overall Dimensions(L*W*H)(mm) | 11920×2530×3995 | ||||||
Total Mass(kg) | 31000 | Curb Weight(kg) | 15250 | ||||
Bulletin loading(kg) | 15620 | Fuel consumption (l/100km) | 32.8 | ||||
Max speed(km/h) | 90 | Minimum turning radius(m) | 12 | ||||
Chassis Model/ Manufacturer | DFH1310A1 /Dongfeng Trucks Company | ||||||
Engine model / manufacturer | ISL9.5-315E51A /Dongfeng Cummins Engine Co., Ltd | ||||||
Transmission model / manufacturer | 12JSD160TA/Shasnxi Fast Gear Co., Ltd | ||||||
Drive Mode: | 8×4 rear wheel drive | wheelbase(mm): | 1850+4600+1350 | ||||
Engine capacity(ml) | 9460 | Maximum torque and rated speed(n.m)/(r/min) | 1600/1300 | ||||
Rated power and rated speed(kw)/(r/min) | 268/1900 | Tire specifications | 295/80R22.5 18PR | ||||
The tank is designed with a fully enclosed structural frame, made of all-aluminum alloy profiles, with light weight, high strength and strong rust resistance. | |||||||
The roof is equipped with an advanced umbrella top design that can be lifted up and down to facilitate temperature control during top loading, unloading, cleaning and disinfection. | |||||||
The professional equipment imported from Dutch technology, adopts the tail lifting loading and unloading method, the internal double channel, can be turned up, easy to handle, clean and disinfect | |||||||
Sliding windows are designed on both sides of the vehicle body for emergency use in high temperature and extreme weather. | |||||||
Area(m2) | 76(contain SPF and heater)/81(contain heater)/88 | ||||||
Number of compartments | 12 | ||||||
Voltage(V) | 24 | Spray tank volume(L) | 250 | ||||
Layer height per floor (mm) | 815/815/865 | ||||||
Number of front fans(pc)/Air volume(m3/h)/pc | 8/2730 | ||||||
Number of rear fans(pc)/Air volume(m3/h)/pc | 8/1300 | ||||||
Flanged without partition MERV 15 filter system | Prevent infection of bacteria during transport of pigs | ||||||
Number of fuel heaters(pc)/power(kW)/air volume(m3/h) | 3/7/230 | ||||||
Water system or spray system can be installed on each floor | |||||||
Insulation partitions are installed on both sides and top of the tank to effectively avoid high temperature conduction and control the internal temperature of the tank. |