Круглое Лезвие триммера для обрезки гофрированной
- Категории: Промышленные ножи >>>
- Поставщик: Nanjing,Licheng,Machinery,Blade,Co.,Ltd.
Поделиться:
Описание и отзывы
Характеристики
Products Description
Brand | LC | ||||||
Material | HSS, M42, TCT | ||||||
Hardness | 62-66HRC; 90HRA | ||||||
Precision | OD±0.05mm, ID0.05-0.08mm usually, Thickness ±0.01mm | ||||||
Roughness | Ra0.2 | ||||||
Certification | ISO9001:2015 | ||||||
OEM Service | Available | ||||||
Applications | Corrugated Paper industry | ||||||
Advantages | 1. Stable quality with super fine grain size and high density 2. Strict tolerance control available for high requirements 3. Excellent wear resistance lasts 5 million meters 4. Superior strength of knife workable for high speed machine | ||||||
Model NO. | Sizes |
Slitter knife 1 | 220*115*1-3*9 |
Slitter knife 2 | 230*110*1.1-6*9 |
Slitter knife 3 | 230*135*1.1 |
Slitter knife 4 | 240*32*1.2-2*8.5 |
Slitter knife 5 | 240*115*1-3*9 |
Slitter knife 6 | 250*150*0.8 |
Slitter knife 7 | 257*135*1.1 |
Slitter knife 8 | 260*140*1.5 |
Slitter knife 9 | 260*168.3*1.2 |
Slitter knife 10 | 280*202*1.4 |
Slitter knife 11 | 291*203*1 |
Company Profile
Manufacturing Technique
Step1 raw materia analysis and choice
Step2 Material forging
Step3 Raw material process
Step4 Material heat treatment
Step5 Product precise manufacturing
Step6 Product inspection
Step7 Product package
Exhibition
Certifications
Packing&Delivery
FAQ
1.Q: How to extend the life time of corrugated paper knifes?
A: 1. Match a suitable grain size of the grinding wheel.
A: 1. Match a suitable grain size of the grinding wheel.
Too coarse grain size of grinding wheel will shorten the life time of knifes.
2.Reduce the grinding frequency, grinding time and lower the grinding pressure.
3.Q: Why there are chips on the cutting edge after grinding?
A: 1.Unstable swing grinding wheels may cause this problem, even break the knifes.
2.Q: Why the edges of corrugated boards cut by knifes with burr and dent?
A: 1.The cutting edge of the blade is not keen enough.
A: 1.The cutting edge of the blade is not keen enough.
2. The corrugated board is too wet.
3.Q: Why there are chips on the cutting edge after grinding?
A: 1.Unstable swing grinding wheels may cause this problem, even break the knifes.
2.The strike of hard things may make the chips on the cutting edge.
Похожие товары
Новинки - Розница
