Новый тип FRP GRP кабельный лоток система поддержки кабельного управления

1. FRP cable trough fitting elbow cover and its support and hanger are used in corrosive environment, should be made of corrosion-resistant rigid material, or adopt anti-corrosion treatment. Anti-corrosion treatment should meet the engineering environment and durability. Claim.

2, slot type I-edge FRP cable trough fitting elbow cover in the section with fire protection requirements, can be added to the cable ladder, tray to have refractory or flame retardant properties of the board, net and other materials to close or semi-close The structure is adopted, and the fireproof coating on the exterior of the bridge and its support and hanger is adopted. The overall fire resistance performance should meet the requirements of relevant national standards or standards.

3. In places where engineering fire protection requirements are high, it is not advisable to use aluminum alloy trough type I-beam FRP cable trough fitting elbow cover.

4, FRP cable trough fittings elbow cover width and height should be selected in accordance with the filling rate requirements, the cable ladder and the filling rate in the tray under normal circumstances, the power cable can take 40% to 50%, the control cable can take 50 % ~ 70%, and should reserve 10% ~ 25% engineering development margin.

5. When selecting the load level of the trough-type FRP cable trough fitting elbow cover, the uniform load of the trough-type FRP cable trough fitting elbow cover should not be greater than the selected trough-type FRP cable trough fitting elbow cover load. The rated uniform load of the grade. If the practice span of the support of the slotted FRP cable trough fitting elbow cover is not equal to 2m, the uniform load of the work should meet the requirements.

6. Under the condition that the various components and supporting hangers meet the corresponding load, the standard scale should match the straight section of the pallet, the ladder frame and the curved series.

7. When selecting the bend or lead-in or lead-out equipment of the FRP cable trough fitting elbow cover, it should not be smaller than the zigzag radius of the cable in the elbow cover of the FRP cable slot fitting.

8. For elbow cover plates of steel trough-type FRP cable trough fittings with a span of more than 6 m and elbow cover plates with a span of more than 2 m or an aluminum alloy trough-type FRP cable trough fitting with load requirements greater than the load class D, The calculation or test verification of strength, stiffness and stability shall be carried out according to the engineering conditions.

9. When several sets of trough-type FRP cable trough fitting elbow cover are laid in parallel at the same height, the maintenance and inspection distance should be considered between the elbow cover plates of adjacent trough-type FRP cable trough fittings.

10. The standard length of the straight through piece of the FRP cable trough fitting elbow cover can be 2, 3, 4, 6m. FRP trough fiberglass cable trough fitting elbow cover, various standards, many types, cost-effective, beautiful color.

The cable trays are manufactured glass by the pultrusion process from isophthalic polyester thermosetting resin reinforced with E glass giving a high strength dimensionally accurate and thermally stable product. The pultruded sections fully comply with all the requirements of EN13706, grade E17 – Specification of pultruded profiles..

GRP cable trays are normally electrical non-conductive but for those applications with risk explosive atmospheres an anti-static version is available to order.

The cable tray is slotted along the length the cable tray also has a unique accepting slot that allows

couplers to be inserted with ease insitu. All cable trays have a bespoke click fit lid.

GRP Cable Trough

GRP Cable Troughs are an extremely robust and cost effective product. Our cable troughing system can be produced in various sizes and has been designed with simplicity in mind thus making it easy to use in a working environment. We have a snap on lid and with its light weight and robustness it makes and excellent ducting system to work with.

All our cable ducting is produced from grp/fiberglass making it light weight and easy to fabricate on site. We also produce GRP couple's along with a grp support system which can be produced to fit any working environment.

We have a full range of GRP Cable Trough profiles and this allows us to produce products to customer demands. Depending upon the volume we can produce cable ducting to colour specific requirements along with producing specific resins for certain applications so whether it's for the Rail Industry, London Underground or areas where extreme corrosion is evident then our grp ducting systems are an excellent choice.

All our GRP Cable Trough as standard is unslotted

discuss your requirements when it comes to grp cable trays.

Hebe dingshengda composite materials Co., Ltd. is professional company which to market & sell FRP Grating FRP Manhole cover FRP Septic tank FRP Pipe, FRP storage tank, FRP molded products, FRP pultrused products and FRP production machines, through the continuous development and introduction of professionality and technology, the company rely on advanced technology, exquisite craftsmanship, reliable quality and perfect service,products have been sold to all over the world, USA, Brazil, Japan, Germany, India, Malaysia,  Egypt etc, and won the support and trust from new & old customers. Major products: FRP vessel and chemical equipment in sets; FRP high, medium & low pressure pipe FRP septic tank FRP molded & pultrused products Electrolytic cell S/F, F/F oli storage tank Whole set of FRP prodcution machines HEBEI DINGSHENGDA COMPOSITE MATERILAS CO.,LTD . not only have ability to sell & supply products, but also has design ability of material, structure and products, our company can provide customers with technical advice, supply of goods and material, transportation, installation supervision etc service. Main application: Urban water supply and drainage Desalination of sea water Chemical industry Metallurygy Brewing Electric power Oil storing Sewage treatment Building Municipal works Highway facilities.

========================================================

Q: Are you trading company or manufacturer ?

A: We are factory. In our group, 

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock.

or it is 15-20 days if the goods are not in stock, it is according to quantity.

Q: Do you provide samples ?

A: Yes, we could offer the sample.

Q: What is your terms of payment ?

A: Payment<=1000USD, 100% in advance. Payment>=1000USD,

30% T/T in advance ,balance before shippment.

If you have another question, pls feel free to contact us.