Спрей PTFE антипригарное покрытие для посуды
US $5.87-$10.56
Yu Ru высококачественные двухкомпонентные водонепроницаемые обои из полиуретана/настенное покрытие бетонный водонепроницаемый
- Категории: Building Coating >>>
- Поставщик: Nantong,YuRu,Engineering,Material,Co.,Ltd.
Поделиться:
Описание и отзывы
Характеристики
\t\t\t\t\t\t\t\t\tODM OEM \t\t\t\t\t\t\t
Product Details
Multi components (Two components)polyurethane waterproof material
Multiple groups of polyurethane waterproof coating is a multi group divided reaction curing type polymer waterproof coating, were obtained by condensation polymerization reaction of isocyanate and polyether polyurethane pre polymer and plasticizer, curing agent, thickening agent, accelerator, filler consisting of multiple solution. Make when the groups divided according to a certain proportion, mixing evenly, brushing in need of construction on the surface of the base layer, the curing reaction formation elastic, tough and durable waterproof coating.
Performance parameter
Item | Project | Index | ||||
Ⅰ | Ⅱ | Ⅲ | ||||
1 | Table Time/h ≤ | 12 | ||||
2 | Hard Drying Time/h ≤ | 24 | ||||
3 | Tensile Strength/MPa ≥ | 2.00 | 6.00 | 12.0 | ||
4 | Elongation at break/% ≥ | 500 | 450 | 250 | ||
5 | Low temperature bending | -35℃,No crack | ||||
6 | Water impermeability | 0.3MPa,120min,Impervious | ||||
Advantages
◇Waterproof coating film elongation rate, high strength, good elasticity
◇Film dense, no bubbles, no pinhole
◇Cold construction, convenient construction
◇Corrosion resistance, acid, alkali, salt and other chemical components
◇Surface adhesion strong, not strong permeability
Application Range
◇Non exposed roofing
◇Underground waterproof: basement floor, side wall, nurse wall, tunnel.
◇Other: roof, toilet, kitchen, balcony, water pool, wall pipe, water outlet
Recommend Products
\t\t\t\t\t\t\t\t\tWhy choose us \t\t\t\t\t\t\t
Company Profile
Scope of application
Key points of construction
◇Basic requirements: flat, strong, fully dry
◇Ingredients: according to the amount of construction, the proportion of each component is mixed, stir evenly
◇Waterproof construction of large area: hybrid coatings with rubber or plastic scraper, uniform coating, uniform thickness,usually 1.5mm-2.0mm, ought to be divided into 3-4 times brushing, brushing after the meeting should be in the previous besmear brushs curing film, and is perpendicular to the direction of scraping.
◇Header and edge processing: the coating is closed.
◇Protection layer: the waterproof layer of the film should be designed to protect the surface according to the design
requirements, to prevent damage to the film waterproof layer
◇Ingredients: according to the amount of construction, the proportion of each component is mixed, stir evenly
◇Waterproof construction of large area: hybrid coatings with rubber or plastic scraper, uniform coating, uniform thickness,usually 1.5mm-2.0mm, ought to be divided into 3-4 times brushing, brushing after the meeting should be in the previous besmear brushs curing film, and is perpendicular to the direction of scraping.
◇Header and edge processing: the coating is closed.
◇Protection layer: the waterproof layer of the film should be designed to protect the surface according to the design
requirements, to prevent damage to the film waterproof layer
Certifications
FAQ
Похожие товары
Новинки - Розница
