366D Plastic Powerful Desoldering Pump Solder Sucker Suction Tin Fire-resistant Vacuum Soldering Iron Desolder Hand Welding

Описание и отзывы

Характеристики

Description:
100% brand new and high quality
Tin sucker
Material: metal, plastic
Size: about 20cm

The package includes: 1pc tin sucker

Usage:

1. First Press the tin suction piston down until it gets stuck.

2. Heat the welding spot with electric soldering iron until the solder melts.

3. When removing the electric soldering iron, quickly stick the tin suction nozzle to the welding spot, and press the tin suction button.

4. It cannot be sucked clean at one time. You can repeat the operation for many times.

Usage skills of tin suction device:

1. Make sure that the tin suction piston is well sealed. Before electrifying, use your fingers to block the small hole of the tin suction head, and press the button. If the piston is not easy to pop up in place, it indicates that the seal is good.

2. The aperture of the tin sucker head has different sizes, and the appropriate specifications should be selected for use.

3. After the tin suction head is used up, it should be replaced with a new one at the right time.

4. Before contacting the solder spot, dip a little Rosin every time to improve the fluidity of the solder.

5. It takes a little longer for the head to contact the solder joint. When the solder is melted, take the solder joint pin as the center, draw a circle clockwise in the direction of hand outward, and then press the tin absorber button