Конкурентоспособная цена металлическое увеличительное стекло с светодиодной

magnifying lamp

Index

LT-86A

Light Power

10w

Lens size

φ127mm,magnifier 3×5×8×10×/15×/20x

Lamp

30 pieces of LED

Voltage

100-240V

Holder Extension

1m

Features:
1.It matches 10w 30pcs of LED light, supply voltage 100-240V;
2, Its active arm is a special design,which can be adjusted conveniently and avoid magnifier's vibration interfere;
3,It matches with metal base and excellent spring mechanism, which brings more strong and rigid support.
4,White optical lens are available to relax the strain of eyesight after long time of use;

Installation Instructions
1, Before using the product, please pay attention to whether the power supply voltage is consistent with the actual voltage.
2, When changing the direction and position of the magnifying glass, if the adjusting arm lock button is too tight, please relax alittle, and then adjust the position and direction before tightening. Never pull forcibly to avoid damaging the components.
3, After turning on the power switch, the lamp is first warmed up for about 1.5 seconds, and then the lamp is normally lit.
4, It is equipped with abnormal state protection. When an abnormal phenomenon occurs in the lamp (the lamp is open, the lamp does not start, and the lamp leaks), the electronic circuit is automatically shut down and locked until the power is turned off to eliminate the abnormal phenomenon.
5, When the lamp is off, check whether it is caused by aging after long-term use. If so, you need to change the lamp. If the lamp does not turn on after replacing the lamp, please check whether the lamp, the lamp plug and the power plug are connected properly.