Инструменты для ногтей стерилизатор инструмент дезинфекции горшок высокая температура маникюрной посуды салонный захват тату

2. Open the lid and put the disinfection bead into the inner container; The number of
disinfection beads should not be too large (not more than 80% of the inner tank volume). 

3. Power on; Turn on the power switch,the heating indicator light is on, and the sterilizer starts heating at the same time. (red light indicates power indicator, green light indicates heating) 

4. The heating process is from 0 ℃ to 185 ℃, and the heating time takes 10 to 12 minutes. When the temperature reaches 185 ℃, insert the tools to be disinfected (such as scissors, razors, etc.) vertically into the disinfection bead. (Note: plastic tools and liquids cannot be put in) 

5. When the temperature reaches 185 ℃, it only takes 30 seconds to disinfect the tool, put on gloves and take out the tool for use. 

6. During the heating process, when the temperature of the inner tank of the sterilizer reaches 185 ℃, the green heating indicator light will automatically go out and the sterilizer will stop heating; When the temperature of the tank decreases to the set temperature, the green heating indicator light will automatically light up and the sterilizer will automatically heat up. 

7. The disinfection beads can be reused. It is recommended to replace them every 3 to 4 months or when they are dirty 8. This is a high-temperature sterilizer. Don't touch the sterilizer directly with your hands to avoid hurting your hands.