The product itself has no stickiness, but after ironing it could be stick on cloths.
There is a layer of hot melt adhesive on the back of each product.
Put the patch on the target position. It is recommended to put a thin cotton cloth on the patch.
Adjust the temperature of the iron to about 150 degrees at the mid-range.
After a little hard ironing for 20-30 seconds, let it cool.
If you are worried about falling off after ironing, you can sew a few stitches on the edge of the patch with needle and thread to prevent it from falling.
Ironing method:
1. Put the cloth sticker on the position you want to paste first, and stick the clothes with the hot melt glue (the glue cannot be torn off)
2. Reverse the clothes (or cover the cloth with a thin layer of cloth and make it crooked from the front, you can use this method but the cloth must not be too thick)
3. Adjust the temperature of the electric iron to 120-160℃, and iron it for 8-15 seconds to heat the cloth evenly.
4. The edge of the cloth sticker should be ironed several times to prevent it from falling off.
5. After the ironed stickers with plastic paper on the surface are cooled (except for hot tearing), carefully tear off the outer
thin layer of plastic from one corner