Пожарный клапан огнетушителя по лучшей цене
US $1.00-$1.20
Огнетушающие вещества для остановки огня-1% AFFF (водно-формовочный фторпротеиновый пеноконцентрат) пенопластовый
- Категории: Fire Extinguishers >>>
- Поставщик: Eastex,(xiamen),Firetec,Limited
Поделиться:
Описание и отзывы
Характеристики
Product Name: | Foam Extinguishing Agents | |||||||
Usage Concentration: | 1% | 3% | 3%/AR | 6% | 6%/ AR | |||
Mixing Ratio: | 1:99 | 3:97 | 3:97 | 6:94 | 6:94 | |||
Type Of Expansion: | Low | Low | Low | Low | Low | |||
Features
1. Green and environment-friendly.
2. Good compatibility.
3. Capable of putting out both A-type fires and (B-type) fires with non-water-soluble liquids.
4. Fast-cooling and water-saving.
5. Eliminating heavy smoke fast,
Due to the different cameras, the product's appearance has a little vary from reality. The picture is only a reference.
▲Products Descriptions
Foam extinguishing agent is an environmentally friendly product, which can be completely self-degradation, it is pollution-free to the atmosphere and soil. and can be discharged in accordance with local regulations of sewage treatment.
Efficiency for fire fight
Environment Friendly
All Have Patented
Application Area
1.Class A + B fires
2.Fires of solid materials
3.Non-alcohol resistant foam extinguishing
4.Municipal fire-brigades
5.Chemical and petrochemical industries
6.Tank storage facilities
7.Power stations
8.Mining
9.Marine
10.Airport
11. Subsea(<= 1000 M)
12. Building
▲Use Method & Notices
1. Mixing ratio: Foam liquid shall be mixed with water into a foam solution when used. The volume percentage of the foam liquid in the foam solution is called the mixing ratio. Inputting out (A-type) fires with solid materials, it is suggested that the mixing ratio of the mixture be adjusted to 0.3% or so; in putting out (B-type) fires with non-water-soluble liquids, it is suggested that the mixing ratio of the mixture be adjusted to 1% or so; in thermal insulation protection, it is suggested that the mixing ratio of the mixture be adjusted to 0.5% - 1%. The optimal mixing ratio may vary, depending on the vehicle type. Users are advised to undertake a mixing ratio test and corresponding foam performance test based on the specific condition of the compressed air foam system equipment for the vehicle so that the fire extinguisher can achieve optimal performance in that compressed air foam system.
2. In order to avoid being diluted by water, if the foam solution is used during the fire-extinguishing process, please do not spray water over the area in the presence of extinguishing fluid at the same time, so as to ensure the fire-extinguishing performance of E-500 extinguishing fluid.
3.The fire extinguisher cannot be mixed with other foam liquids since such mixture may cause chemical changes to the product and thus weakens its fire-extinguishing ability. However, it can be used coordinately with most other foamites when put out.
▲ Product Show
1.Foam extinguishing agent can be ideally stored in the vessel with a package or a tank or any other receptacle that is
exclusively designed for storing such foam liquid. It is suggested that the receptacle adopted made of such materials as stainless steel (304-type and 316-type), high-density cross-linked polyethylene resin, or glass fiber reinforced polyester resin lined with vinyl ester coat (1.5-2.5 mm)
exclusively designed for storing such foam liquid. It is suggested that the receptacle adopted made of such materials as stainless steel (304-type and 316-type), high-density cross-linked polyethylene resin, or glass fiber reinforced polyester resin lined with vinyl ester coat (1.5-2.5 mm)
2. Avoid sun exposure, store sealed. Foam liquids would evaporate, particularly when exposed to air where the evaporation could accelerate. Therefore the foaming should be stored sealed in order to prevent the liquid from evaporating. If stored in a fluid reservoir, it should be sealed and covered with a ventilation valve in order to prevent the air from flowing freely inside the reservoir.
3. Environmental temperature for storage is suggested to keep within the range of 5 ℃- 45 ℃.
4. Inversion is strictly prohibited. Stacking cannot exceed three layers.
Fire Extinguishing Agents -Independent Research and Development
Eastex all fire extinguisher agents are our development, and have patents. The fire-extinguishing agent adopts a photochemistry cooling effect and can reduce the temperature of the fire field from over 1000℃ to touchable temperature within 40 seconds, effectively protecting personal safety.
Eastex (Xiamen) Firetec Limited. was set up in 2005, it is a high-tech firm that focused on developing, producing, and selling the annihilator, extinguisher and Firefighting safety equipment system that are high efficiency, and environmental friendly. The Eastex gathered a team of experts, and build the strategic and cooperative partnership with Xiamen Institute of Chemical Technology, China Academy of Sciences Research Institute of Organic Chemistry, China Academy of Sciences Research Institute of the City Public Security Technology, and the Chen Department of Shanghai high-tech enterprises, ltd., to ensure the products maintain its firefighting industry leading position in China and the world.
Honor
2022 Subsea Tunnel ( Xiang'an XIamen)
2015 April 6 explosion major accident” of PX project in Gulei
▲Qualification
Похожие товары
Крюк и петля сковать безопасности Огнетушитель ремень
US $1.50-$2.50
Аварийный инструмент, маленький Огнетушитель для автомобиля
US $0.67-$0.80
Новинки - Розница
