For Epson T802 812 822 Refill Cartridges
The red indicator light is always on after flashing, and does not change to green light:
Reason 1: The probe of the chip resetter is not aligned with the contacts of the chip, or the contacts are dirty
Reason 2: If the non-original Epson ink cartridge is used, the chip may not be in close contact with the control needle.
Instructions for chip/cartridge before use:
1. First remove the transparent rubber plug of the ink filling hole of the ink cartridge.
2. Use a tool to fill the ink cartridge with ink.
3. Put the transparent rubber stopper back into the ink filling hole.
4. Remove the colored air rubber plug (if you do not know the air hole, please contact the seller ).
5. Install the corresponding color of the ink cartridge into the corresponding printer color.
6. The printer will clean the nozzle, after cleaning, it can be used normally.
Please strictly follow the steps 1~6 above
If there is something you don't understand, please communicate clearly with the store before purchasing.
1. Easy to add ink.
2. Features: No need to buy new ink cartridges, no waste of a drop of ink, more perfect and more scientific promotion.
3. Low cost: The large-capacity ink supply system of 100ML per color (with continuous supply) is adopted, which greatly reduces the cost compared with the original ink cartridge.
4. Convenience: No need to replace ink cartridges or refill ink, once installed, it is smooth.
5. Advantages: no damage to the printer; no need to replace ink cartridges.