Титановый Массажер для кожи лица против морщин 0 2-3 мм
- Категории: Derma Rolling System >>>
- Поставщик: Guangzhou,Hengxin,Technology,Co.,Ltd.
Поделиться:
Описание и отзывы
Характеристики
PRODUCT DESCRIPTION
CE/ ROHS certificates approved
Product name | High-end metal derma roller |
Model No. | HYC-DR901 |
Needle QTY | 540 |
Needle length(mm) | 0.2, 0.25, 0.3, 0.5, 1.0, 1.5, 2.0, 2.5, 3.0 |
Product size | 13.5cm |
Needle material | Titanium |
Color | Gold/Red |
Certificate | CE/ ROHS |
Accessories | Roller 1pc |
Packaging | Color box |
Derma pen net weight | 61g |
Net weight per set | 200g |
Box size | 17.3*6.3*4.7cm |
QTY/CTN | 100pcs |
PRODUCT DETAIL
Professional ODM / OEM is supported
1. Does not destroy the integrity of the skin structure;
2. Gradually remove deep toxins and waste from the skin;
3. Establish a large number of skin micro-pipes to transport the base beauty products; (only takes 5 minutes to create more than 10,000 micro-holes);
4. Directly deliver the required active ingredients to the skin to better absorb the position; the unique Nanoscale
complexed biological factors have a symptomatic effect, the purpose is clear, the effect is remarkable, and the product
component penetration rate is hundreds of thousands of times higher than that of the ordinary beauty products;
5. Stimulate skin's self-healing ability, promote skin metabolism, maintain skin elasticity and beauty;
6. Activate cells, repair damaged tissues, directly participate in cell metabolism, and achieve the effects of wrinkle, lifting,
whitening and anti-aging;
7. Unique bioactive ingredients promote cell immunity, slow down skin aging, and maintain a youthful state for a long
time;
8. Use the natural healing ability of the wound to induce the skin's own nutrition and collagen growth;
9. Significant efficacy, safe and reliable, easy to operate, non-invasive, also known as "noon break beauty";
10. Safe and natural, easy and simple, instantly see the changes in the skin.
2. Gradually remove deep toxins and waste from the skin;
3. Establish a large number of skin micro-pipes to transport the base beauty products; (only takes 5 minutes to create more than 10,000 micro-holes);
4. Directly deliver the required active ingredients to the skin to better absorb the position; the unique Nanoscale
complexed biological factors have a symptomatic effect, the purpose is clear, the effect is remarkable, and the product
component penetration rate is hundreds of thousands of times higher than that of the ordinary beauty products;
5. Stimulate skin's self-healing ability, promote skin metabolism, maintain skin elasticity and beauty;
6. Activate cells, repair damaged tissues, directly participate in cell metabolism, and achieve the effects of wrinkle, lifting,
whitening and anti-aging;
7. Unique bioactive ingredients promote cell immunity, slow down skin aging, and maintain a youthful state for a long
time;
8. Use the natural healing ability of the wound to induce the skin's own nutrition and collagen growth;
9. Significant efficacy, safe and reliable, easy to operate, non-invasive, also known as "noon break beauty";
10. Safe and natural, easy and simple, instantly see the changes in the skin.
COMPARISION OF EFFECTS
Professional ODM / OEM is supported
Before After
Scope of application:
Below 0.3MM-----just ordinary maintenance.
0.5MM ---- daily care and maintenance, whitening spots, repair, red blood, new acne marks.
1.0MM ------ Remove acne pit, remove stretch marks, over 2 years acne.
Above 1.5MM: ------ only suitable for beauty salon operation
Directions:
1. Red bloodshot, 0.2-mm-0.3mm long needle is recommended for the eye.
2. Wrinkles, whitening, freckle. It is recommended to use 0.25mm---0.5mm long needles.
3. Remove stretch marks (orange peel, slimming lines), it is recommended to use 1-1.5mm long needles.
4. Wine nose, concave, acne pit, scar repair is recommended to use 1mm--1.5mm needles.
5. The hair growth treatment is recommended to use 1.5mm--2.0mm long needles.
Characteristic:
Needle length of 0.25 into Stratum corneum,
0.5 into the epidermal and dermal interface,
1.0 into the dermis,
1.5 into the dermis layer more one-some,
2.0 into the dermis,
Needle length of 0.25-0.5 enters the transition layer between the epidermis or the epidermis to release the essence or nutrients into the epidermis to help the skin repair.
Needle length of above 0.5 mm can enter the dermis, so the minimally invasive effect of the mesoderm dermis can stimulate the skin to enter the self-repair state.
Below 0.3MM-----just ordinary maintenance.
0.5MM ---- daily care and maintenance, whitening spots, repair, red blood, new acne marks.
1.0MM ------ Remove acne pit, remove stretch marks, over 2 years acne.
Above 1.5MM: ------ only suitable for beauty salon operation
Directions:
1. Red bloodshot, 0.2-mm-0.3mm long needle is recommended for the eye.
2. Wrinkles, whitening, freckle. It is recommended to use 0.25mm---0.5mm long needles.
3. Remove stretch marks (orange peel, slimming lines), it is recommended to use 1-1.5mm long needles.
4. Wine nose, concave, acne pit, scar repair is recommended to use 1mm--1.5mm needles.
5. The hair growth treatment is recommended to use 1.5mm--2.0mm long needles.
Characteristic:
Needle length of 0.25 into Stratum corneum,
0.5 into the epidermal and dermal interface,
1.0 into the dermis,
1.5 into the dermis layer more one-some,
2.0 into the dermis,
Needle length of 0.25-0.5 enters the transition layer between the epidermis or the epidermis to release the essence or nutrients into the epidermis to help the skin repair.
Needle length of above 0.5 mm can enter the dermis, so the minimally invasive effect of the mesoderm dermis can stimulate the skin to enter the self-repair state.
INSTRUCTIONS FOR USE
Anti-wrinkle firming facial skin massage 0.2-3mm 540 needles titanium Derma Roller
sold).
2. Wash your face with facial cleanser in the usual way and rinse off.
3. Dripping the effect type liquid or lyophilized powder (dissolving the lyophilized powder and the mother cell solvent first),
while using the derma roller to roll on the face for 3-5 minutes, if you’re the first time to use the derma roller, should not roll too hard, and we will adjust ourselves if we are naturally skilled.
4. After rolling the needle, apply a hydrating mask, no need to rinse the hydrating mask, no need to use other skin care
products.
5. Skin care can be done the next morning with daily care.
Cleansing method of derma roller: Take the brush against the tap water, while brushing, rinse the micro-needle, then put it into the disposable cup and then use alcohol for 15 minutes, then use the boiling water to clean the alcohol first.
PACKAGING & SHIPPING
Professional ODM / OEM is supported
COMPANY INFORMATION
Professional ODM / OEM is supported
Guangzhou Hengxin Technology Co., Ltd. is a high-tech enterprise which is dedicated to the research and development, production, sales and service of female beauty products and body products. It has a perfect and scientific quality management system. The company has an experienced R&D engineer team to provide customers with independent and innovative quality products; with advanced high-precision mechanical equipment and different series of assembly lines, effectively provide customers with high-quality products, increase production capacity, ensure delivery, for Professional OEM processing services are available to customers with different needs.
The company is currently specialized in the production of derma roller, electric derma pen, derma roller head, as well as PDT skin LED mask rejuvenation instrument, photodynamic beauty instrument, facial care beauty instrument and other home beauty equipment, products sell well all over the world, including Europe, the United States, South America, the Middle East, Southeast Asia and so on.
The company always adheres to the core concept of people-oriented, all from the user experience, with advanced technology, sophisticated equipment, and thoughtful service to create high-quality products.
The company is currently specialized in the production of derma roller, electric derma pen, derma roller head, as well as PDT skin LED mask rejuvenation instrument, photodynamic beauty instrument, facial care beauty instrument and other home beauty equipment, products sell well all over the world, including Europe, the United States, South America, the Middle East, Southeast Asia and so on.
The company always adheres to the core concept of people-oriented, all from the user experience, with advanced technology, sophisticated equipment, and thoughtful service to create high-quality products.
FAQ
Professional ODM / OEM is supported
1. Can I request a sample before order in bulk?
Yes, we could provide samples to customer, the sample charge also could return back.
2. How can I pay for the samples? Sample delivery time?
PayPal, T/T, Western Union, Alibaba trade assurance etc. You could choose the most convenience one. we can make delivery in 2-5 working days by DHL/UPS/TNT etc. Normally the samples will be your office 7-10 working days.
3. Can I have the customized logo printed on the product?
Yes, we could make customized logo printed as per customer's requirements. We have capability to use various
different printing methods, including silk screen printing, pad printing, heat transfer printing, embroidery, laser, decal
and etc.
4. Can we visit your factory? How can I get there?
Warmly welcome to our factory, please advise us your schedule before you come, and we can arrange our driver to pick
you up from the airport or hotel.
1. Can I request a sample before order in bulk?
Yes, we could provide samples to customer, the sample charge also could return back.
2. How can I pay for the samples? Sample delivery time?
PayPal, T/T, Western Union, Alibaba trade assurance etc. You could choose the most convenience one. we can make delivery in 2-5 working days by DHL/UPS/TNT etc. Normally the samples will be your office 7-10 working days.
3. Can I have the customized logo printed on the product?
Yes, we could make customized logo printed as per customer's requirements. We have capability to use various
different printing methods, including silk screen printing, pad printing, heat transfer printing, embroidery, laser, decal
and etc.
4. Can we visit your factory? How can I get there?
Warmly welcome to our factory, please advise us your schedule before you come, and we can arrange our driver to pick
you up from the airport or hotel.
Похожие товары
Новинки - Розница
