OEM завод Африканский Полуавтоматический гидравлический Кирпич из глины полностью автоматический цементный
- Категории: >>>
- Поставщик: Zhengzhou,Yongsi,Commercial,&trading,Co.,Ltd.
Поделиться:
Описание и отзывы
Характеристики
Product Description
YS4-15 - Best selling automatic model
We provide complete technical support, including site planning, installation guidance, technical training and after-sales service.
1.Material and welding: All material and spare parts selected according to international CE standard, Carbon dioxide protection will assure whole line stable running.
2. Electric control system: We selected original Mitsubishi PLC combine with independent machine control system to assure stable and high-efficiency working status.
3.Switches and motor:Switched will use Japan Omron or France Schneider, motor will use Siemens or ABB band.
4.Hydraulic system: The machine adopting the advanced hydraulic molding technology, it can assure the block machine have stable and high-efficiency working status, and the blocks produced are of better quality,larger density and higher strength.
5.Block mould: Our block moulds are made of Q355R manganese steel.Besides the good raw material, precise line cutting technology and 900ºC carburizing heat treatment technology are all adopted in the process of brick moulds production.Then the mould size error can be controlled within 0.002mm . The surface layer of the brick moulds get higher hardness (achieving HRC54-58) and better wear resistance.
6. Vibration system: The machine adopts the special technology to optimize the vibration shaft, so that the proportion of vibration is covered in the whole surface range, so the product quality is greatly improved and the noise is effectively reduced.
The machine's unique fixed platform design forms can improve the molding speed and dimensional accuracy.
We provide complete technical support, including site planning, installation guidance, technical training and after-sales service.
1.Material and welding: All material and spare parts selected according to international CE standard, Carbon dioxide protection will assure whole line stable running.
2. Electric control system: We selected original Mitsubishi PLC combine with independent machine control system to assure stable and high-efficiency working status.
3.Switches and motor:Switched will use Japan Omron or France Schneider, motor will use Siemens or ABB band.
4.Hydraulic system: The machine adopting the advanced hydraulic molding technology, it can assure the block machine have stable and high-efficiency working status, and the blocks produced are of better quality,larger density and higher strength.
5.Block mould: Our block moulds are made of Q355R manganese steel.Besides the good raw material, precise line cutting technology and 900ºC carburizing heat treatment technology are all adopted in the process of brick moulds production.Then the mould size error can be controlled within 0.002mm . The surface layer of the brick moulds get higher hardness (achieving HRC54-58) and better wear resistance.
6. Vibration system: The machine adopts the special technology to optimize the vibration shaft, so that the proportion of vibration is covered in the whole surface range, so the product quality is greatly improved and the noise is effectively reduced.
The machine's unique fixed platform design forms can improve the molding speed and dimensional accuracy.
Specification
item | Brick making machine |
Applicable Industries | Construction works |
Condition | New |
Type | Hollow Block Making Machine, Paving Block Making Machine, Interlock Block Making Machine, Curbstone Block Machine, Autoclaved aerated concrete block (AAC) |
Brick Raw Material | Clay |
Processing | Brick Production Line |
Method | Hydraulic pressure |
Automatic | Yes |
Production Capacity (Pieces/8 hours) | 4480 pcs/8hours, 2500 pcs/8hours, 3400 pcs/8hours, 5760 pcs/8hours, 1500 pcs/8hours, 3000 pcs/8hours, 12000 pcs/8hours, 3200 pcs/8hours, 2560 pcs/8hours, 1000 pcs/8hours |
Place of Origin | China |
Henan | |
Brand Name | Yongsi |
Voltage | 380V |
Dimension(L*W*H) | 12*2*1.5M |
Warranty | 1 Year |
Key Selling Points | Easy to Operate |
Brick size | 400*100*200 mm, 400*120*200 mm, 200*100*60 mm, 300*150*100 mm, 400*150*200 mm, 240*115*90 mm, 200*200*60 mm, 150*150*100 mm, 400*200*200 mm, 230*220*115 mm |
Machinery Test Report | Provided |
Video outgoing-inspection | Provided |
Marketing Type | Hot Product 2021 |
Warranty of core components | 1 Year |
Core Components | Engine, Motor, Pump |
Weight (KG) | 900kg |
Block Type | Hollow Concrete Brick Machine |
Raw material | Clay |
Product Name | Concrete Block Machine Block Making Machine |
Keywords | Clay Brick Making Mahcine |
Pallet size | 850*550*30mm |
Method | Molding Vibration |
Application | Construction Engineering |
Molding cycle | 15-20s |
Vibration frequency | 2800-4500r/min |
After-sales Service | 24-hour Oneline |
Material:
EPS(polystyrene) 1. 8%-10% cement, 30-40% sand, 50-60% crushed stone2. 8-10% cement, 30% fly ash, 60% sand or stone powder Other
materials can also be used
materials can also be used
Production process
1. Material Batching and preparation Section: Raw materials are discharged to the mixer. The mixed raw materials are sent to the mixer.
2.Mixing Section: After being mixed evenly with water, raw material are unloaded to the block making machine through belt conveyor. 3. Put the polystyrene on the special device
4.Block forming Section: Mixed raw material are then sent to the mould case. Under PLC computer intelligent control. Hydraulic transmission, vibration, shaping takes place.
5.Automatic Stacker Section: After demoulding ,green brick will be unloaded to the bamboo pallet.
6.Block Curing Section : Wet product will be conveyed through green block conveyor then to the stacker.
2.Mixing Section: After being mixed evenly with water, raw material are unloaded to the block making machine through belt conveyor. 3. Put the polystyrene on the special device
4.Block forming Section: Mixed raw material are then sent to the mould case. Under PLC computer intelligent control. Hydraulic transmission, vibration, shaping takes place.
5.Automatic Stacker Section: After demoulding ,green brick will be unloaded to the bamboo pallet.
6.Block Curing Section : Wet product will be conveyed through green block conveyor then to the stacker.
Packing & Delivery
Wooden packing
Company Profile
Zhengzhou Yongsi Commecial&Trading Co., Ltd, located in Zhengzhou, which is a large engineering machinery manufacturing enterprise which focus on research and development, production and sale kinds of bricks make machines and construction machinery and so on.We insist on the strategy of technology research and development. Technical design, material purchasing, precised manufacturing and strict quality inspection are all processed according to the ISO9001 standard. Our company experienced 10 years of high-speed development, gathering large number of talents and winning sound reputation and credibility. Our product quality, rapid and healthy development ensured by convenient transportation network, advanced management concepts, and comprehensive management system.We sincerely expect to cooperate with various circles, achieve mutual benefit and win-win situation.
FAQ
1. who are we?
We are based in Henan, China, start from 2021,sell to Eastern Europe(20.00%),Central America(20.00%),Africa(15.00%),North America(10.00%),Mid East(10.00%),Western Europe(10.00%),Northern Europe(10.00%),South America(5.00%). There are total about 5-10 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Bricks make machines and construction machinery,water well drilling machine,DTH drilling rig,Achor drilling rig,Air compressor,Generator set and so on.
4. why should you buy from us not from other suppliers?
Zhengzhou Yongsi Commecial&Trading Co., Ltd, located in Zhengzhou, its a large engineering machinery manufacturing enterprise which focus on research and development, production and export kinds of drilling rigs for more than 10years,to many countries.
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FCA,CPT,DDP,DDU,Express Delivery；
Accepted Payment Currency:USD,EUR,AUD,HKD,CNY;
Accepted Payment Type: T/T,L/C,MoneyGram,Credit Card,PayPal,Western Union,Escrow;
Language Spoken:English,Chinese,Spanish,German,French
We are based in Henan, China, start from 2021,sell to Eastern Europe(20.00%),Central America(20.00%),Africa(15.00%),North America(10.00%),Mid East(10.00%),Western Europe(10.00%),Northern Europe(10.00%),South America(5.00%). There are total about 5-10 people in our office.
2. how can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.what can you buy from us?
Bricks make machines and construction machinery,water well drilling machine,DTH drilling rig,Achor drilling rig,Air compressor,Generator set and so on.
4. why should you buy from us not from other suppliers?
Zhengzhou Yongsi Commecial&Trading Co., Ltd, located in Zhengzhou, its a large engineering machinery manufacturing enterprise which focus on research and development, production and export kinds of drilling rigs for more than 10years,to many countries.
5. what services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,FCA,CPT,DDP,DDU,Express Delivery；
Accepted Payment Currency:USD,EUR,AUD,HKD,CNY;
Accepted Payment Type: T/T,L/C,MoneyGram,Credit Card,PayPal,Western Union,Escrow;
Language Spoken:English,Chinese,Spanish,German,French
Похожие товары
Новинки - Розница
