Двухслойный шлем для пескоструйной обработки защита от брызг абразивной пыли и шума с линзами
- Категории: Cleaning Equipment Parts >>>
- Поставщик: Zhuzhou,Better,Tungsten,Carbide,Co.,Limited
Поделиться:
Описание и отзывы
Характеристики
Our company is a professional manufacturer helmet protection series supporting products. The main function of our company is to prevent splashing abrasive and dust and noise caused by sand blasting. it is necessary for sandblasting operation to protect the workers from dust to lung injury. Suitable for arc spaying,spraying, anti-corrosion engineering, chemical industry, metal anti-corrosion ,glass,hardware large cutting, crushing,grinding , ash cleaning and other bad special place.
Product Description
1.Protective clothing This product adopt high strength ABS material, and it is formed in one time.Non-toxic and tasteless, spot red and yellow, the appearance of color gorgeous ;The air inlet is equipped with noise -cancelling device to avoid noise cauesd by strong airflow entering; it is provided with an air intake guide slot to evenly distribute the air around and the main flow to the front of the picture frame , so as to eliminate the breathing air, make the line of sight clearer, and avoid the discomfort caused by the air directly blowing on the head, the overall design of comfortable ventilation effect is scientific and reasonable ,the top is equipped with safe helmet soft plastic shock-absorbing adjustment network and sponge gasket, the size can be adjusted wide, the size is tightly sealed ,easy to disassemble and disassemble. The lens of the window can be changed directly without taking off the garment. The neck is quipped with an elastic seal for stronger tightness, and the front and rear shawl is fastened, making it easy to wear. The product has the characteristics of durability.
2.Helmet models are divided into HY-02A and HY-02B
HY-02A
For wide windows , double -layer PVC lenses are adopted. The thickness of PVC lenses is normally configured as 0.5mm.
Double side protective film shall be removed before use.
Double side protective film shall be removed before use.
HY-02B
The inner layer is 1mm thick PVC lens, which is equipped with double sided protective film when leaving the factory. The
double sided protective film should be removed before use, and the outer layer is glass lens. The two layers of lens must be used together to prevent the breakage of glass from causing harm to human body.
double sided protective film should be removed before use, and the outer layer is glass lens. The two layers of lens must be used together to prevent the breakage of glass from causing harm to human body.
Three type for you to select
(1)Cape type
(1)Cape type
Wear simple , light. can protect the individual local ,especially sand blasting operation, can resist the steel shot of bounce back pain and harm to human body ,will arrange to go down those routes from the helmet airflow to the chest back.
(2)The upper jacket type
Can protect the individual,especially sand blasting operation, can resist the steel shot of bounce back pain and harm to human body, to go down those routes from the helmet airflow will be suitable to the entire upper body.
(3)Even
Can protect the individual,especially sand blasting operation, can resist the steel shot of bounce back pain and harm to human body, to go down those routes from the helmet airflow will be suitable to the whole body.
Brand | BSTEC |
Model | HY-02 |
Name | Sand Blast Helmets Hard Hat ABS Safety Helmets Construction Helmets |
Main Material | ABS |
Certification | CE EN397: 2012 |
Application | To protect head during sandblasting |
Related Products
Похожие товары
Новинки - Розница
