Диапазон измерения 10000 ионов/cc ~ 19990000 счетчик ионов воздуха для генератора отрицательных с ремешком на
- Категории: Gas Analyzers >>>
- Поставщик: Shenzhen,Chenzhou,Technology,Co.,ltd.
Поделиться:
Описание и отзывы
Характеристики
Air Ion Tester Meter Counter
for Negative Air Ion Generator
with a Wrist Strap
·EASY TO READ
AIT (P) anion ion gauge is AIT gauge improved, it is the biggest difference between the AIT is the maximum value of the measured air ions remain on the display, it will give the instrument readings more stable.
·SIMPLE AND SMALL DESIGN
This air ion tester is easy to carry as there is a wrist strap, and it is used to remove static from you.
·APPLICATION
This air ion tester is designed for test high level concentration of negative or positive air ion. This instrument can be used to determine whether the negative ion polarity produced by air negative ion generator or air purifier is correct, and the concentration of ion concentration can be estimated .
·MEASURING RANGE
10000 ions/cc~19,990,000 ions/cc.
·LCD DISPLAY
Display value units for the million, the maximum reading 1999.
Advantages:
·AIT (P) anion ion gauge is AIT gauge improved, it is the biggest difference between the AIT is the maximum value of the measured air ions remain on the display, it will give the instrument readings more stable, easy to read . Before each measurement to confirm the switch in the "off" position, when you start to make the instrument away from the object, so that its initial reading of zero or close to zero regulation and then slowly close the ion source. It displays the reading will remain until the power is turned off.
·Descriptions: This instrument is a qualitative product, rather than quantitative products, because of the accuracy, only suitable for testing values of negative ion air purifiers and negative ion generator.
AIT (P) anion ion gauge is AIT gauge improved, it is the biggest difference between the AIT is the maximum value of the measured air ions remain on the display, it will give the instrument readings more stable.
·SIMPLE AND SMALL DESIGN
This air ion tester is easy to carry as there is a wrist strap, and it is used to remove static from you.
·APPLICATION
This air ion tester is designed for test high level concentration of negative or positive air ion. This instrument can be used to determine whether the negative ion polarity produced by air negative ion generator or air purifier is correct, and the concentration of ion concentration can be estimated .
·MEASURING RANGE
10000 ions/cc~19,990,000 ions/cc.
·LCD DISPLAY
Display value units for the million, the maximum reading 1999.
Advantages:
·AIT (P) anion ion gauge is AIT gauge improved, it is the biggest difference between the AIT is the maximum value of the measured air ions remain on the display, it will give the instrument readings more stable, easy to read . Before each measurement to confirm the switch in the "off" position, when you start to make the instrument away from the object, so that its initial reading of zero or close to zero regulation and then slowly close the ion source. It displays the reading will remain until the power is turned off.
·Descriptions: This instrument is a qualitative product, rather than quantitative products, because of the accuracy, only suitable for testing values of negative ion air purifiers and negative ion generator.
Usage:
·Switch to the "ON" position.
·Keeping the thumb and the square in front of the sheet metal, the metal plate toward the back of the air tested negative ion generator, and tested the closer air anion generator tester readings higher, whereas smaller. Therefore, to ensure the accuracy of the measurement results, leave the meter and test negative ion generator to maintain an appropriate distance.
·The measurement process, do not touch the metal piece to the back of the instrument, otherwise it would be inaccurate readings.
·If the reading is not preceded by the measurement symbol is measured positive ions, if the display "-" is negative ion surface.
·To re-measure should first turn off the power, then restart it.
·The measurement method textiles: the thumb in contact with the front metal plate, the metal plate toward the back of the textile gently rubbing test, the display will show the ion concentration and to polarity, which can produce ions as the ability of a fabric kinds of important reference.
Notes:
·This instrument is a-high impedance measuring meter, it must pay attention to moisture when using and collecting, if moisture appeared then testing is unstable, reading disorder and other problems, then the available hair dryer or drying in the sun.
·When the battery runs low battery symbol appears, it should open the back cover to replace the battery with the specifications and attention battery polarity.
·If you need to get a more accurate ion content or measured ion content in the environment less than 10,000 (ions / cc) of the following, choose other anion detector please.
·The product has 2 built-in button batteries. In addition, four external button batteries are needed.
·Switch to the "ON" position.
·Keeping the thumb and the square in front of the sheet metal, the metal plate toward the back of the air tested negative ion generator, and tested the closer air anion generator tester readings higher, whereas smaller. Therefore, to ensure the accuracy of the measurement results, leave the meter and test negative ion generator to maintain an appropriate distance.
·The measurement process, do not touch the metal piece to the back of the instrument, otherwise it would be inaccurate readings.
·If the reading is not preceded by the measurement symbol is measured positive ions, if the display "-" is negative ion surface.
·To re-measure should first turn off the power, then restart it.
·The measurement method textiles: the thumb in contact with the front metal plate, the metal plate toward the back of the textile gently rubbing test, the display will show the ion concentration and to polarity, which can produce ions as the ability of a fabric kinds of important reference.
Notes:
·This instrument is a-high impedance measuring meter, it must pay attention to moisture when using and collecting, if moisture appeared then testing is unstable, reading disorder and other problems, then the available hair dryer or drying in the sun.
·When the battery runs low battery symbol appears, it should open the back cover to replace the battery with the specifications and attention battery polarity.
·If you need to get a more accurate ion content or measured ion content in the environment less than 10,000 (ions / cc) of the following, choose other anion detector please.
·The product has 2 built-in button batteries. In addition, four external button batteries are needed.
Specifications | ||||||||
Product Name | Air Detector/Air Tester | |||||||
Item Name | Air Ion Meter/Air Ion Counter | |||||||
Type | Digital | |||||||
Style | Hand-held | |||||||
Material | ABS+Electronic Parts | |||||||
Dimensions | 80mm x 30mm x 13mm/3.15 inches x 1.18 inches x 0.51inches | |||||||
Weight | 89g | |||||||
Display Method | LCD Screen Digital Displaying | |||||||
Counts/Max.Displaying | 2000/1999 | |||||||
Measurement Range | 1 x 10000 ions/cc ~ 1999x10000 ions/cc | |||||||
Resolution | 1 x 10000 ions/cc | |||||||
Power Supply | 2 x 1.5V LR44 Button Batteries | |||||||
Each Set Includes | 1 x KT-401 Air Ion Meter | |||||||
1 x KT-401 Air Ion Meter | ||||||||
4 x Extra 1.5V LR44 Button Batteries | ||||||||
1 x Wrist Strap | ||||||||
1 x User Manual | ||||||||
1 x Colorful Box | ||||||||
Похожие товары
Новинки - Розница
