Поделиться:
Model No.: RMX4050 /RMX5050
--The RMX 4050 provides improved thermal performance that gives you higher continuous power in 2 ohms stereo or 4 ohms bridged applications
--Dual mono, high current power supply for increased reliability and performance
--3U chassis only 16" deep
--Professional quality performance - incorporates road-proven QSC designs
--High-current toroidal transformers for greater 2 ohm power and low noise
--Independent user-defeatable clip limiters reduce distortion
--Selectable low frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom
--Balanced 1/4" (6.3 mm) TRS, XLR and barrier strip inputs
--Binding post and Neutrik Speakon outputs
--Front mounted gain controls for easy access
--Signal and Clip LED indicators to monitor performance
RMX4050 Specification | |
Stereo Mode(both channels driven) | Continuous average output power per channel |
8Ω / FTC 20Hz-20kHz / 0.1% THD | 1000W |
8Ω / EIA 1kHz / 0.1% THD | 1100W |
4Ω / FTC 20Hz-20kHz / 0.1% THD | 1600W |
4Ω / EIA 1kHz / 0.1% THD | 1800W |
2Ω / FTC 20Hz-20kHz / 0.1% THD | 2000W |
2Ω / EIA 1kHz / 0.1% THD | 2500W |
Bridge Mono Mode | Continuous average output power |
8Ω / FTC 20Hz-20kHz / 0.1% THD | 3200W |
8Ω / EIA 1kHz / 0.1% THD | 3600W |
4Ω / EIA 1kHz / 0.1% THD | 4700W |
Signal to Noise(20Hz-20kHz) 8Ω | >-100dB |
Distortion(SMPTE-IM) | <0.02% |
Frequency response | 20Hz-20kHz:+0/-1dB |
Damping Factor(1 kHz and below) | >300 at 8Ω |
Input impedance | 10k ohms unbalanced/20k ohms balanced |
Input Sensitivity at 8Ω | 1.42V(+5.3dBu) |
Voltage Gain | 64x(36dB) |
Amplifier Protection | Full short circuit, open circuit, thermal,ultrasonic,RF protection.Stable into reactive or mismatched loads |
Load protection | Triac crowbar on each channel |
Shipping weight | 35KG |
Shipping Dimensions | 630mm*580mm*220mm |
Workshop:
For fast response please contact:
Wind Sun
Whatsapp/wechat: +86 13926431918