Одна часть самовыравнивающегося черного полиуретанового водонепроницаемого покрытия для крыши подвала бассейна резервуара
- Категории: Waterproofing Materials >>>
- Поставщик: Shanghai,Sepna,Chemical,Technology,Co.,Ltd.
Поделиться:
Описание и отзывы
Характеристики
Our Products
Product Description
SEPNA grey modified silicone coating for roofs MS190
It reacts with water to form an elastic material, and its surface drying time and curing time are related to temperature and humidity. Increasing temperature and humidity can reduce surface drying and curing time, and low temperature and low humidity can also delay this process.
The product has been proved to have excellent UV resistance, so it can be used not only indoors but also outdoors.
Key Features
2. Excellent weatherability, anti-aging, mildew resistance, full extension, full bonding.
3. Excellent appearance, excellent sealing, excellent waterproof and excellent wear resistance;
4. Wide bonding range, fast curing, convenient repair, tear resistance, no cracking, and can be sprayed with paint
Typical Applications
Reservoirs
ROOFS
Bathroom
1. Waterproof and moisture-proof of kitchen, toilet, balcony, roof and other ordinary home decoration;
2. Anti seepage and leakage prevention of reservoirs, water towers, water tanks, swimming pools, baths, fountain pools, reservoirs, sewage treatment pools and drainage and irrigation channels; 3. It is used for leakage and corrosion prevention of basement, underground tunnel, deep well and underground pipeline with good air permeability;
4. Bonding and moisture-proof of various floor tiles, marble, wood, asbestos, etc.
Swimming pool
Kitchen
Drainage
Underground parking and Basement
Balcony
Warehouse
Technical Data Sheet
PROPERTY | STANDARD / UNITS | VALUE-MS190 | ||
Appearance | Visual inspection | White, customizable color Self-leveling | ||
Tack free time | Min | 30-50 | ||
Viscosity | MPa.s | 10000±15000 | ||
Tensile Strength at Break | MPA | ≥1 | ||
Elongation at break | % | ≥ 250-300 | ||
Construction temperature | ℃ | 5-35 | ||
Operating temperature | ℃ | -40～+100 | ||
Solid content | % | ≥98 | ||
Shelf life | month | ≥6 | ||
Note：All data above were tested under special condition ( 7 days after full cured). | ||||
Application Process
Please paint at least 2 times to make sure the effect.And it will get perfect effect if paint 3 times.
Coat film:
Thickness : 2.00mm, usage is 2.5kg per square meter
Thickness : 3.00mm, usage is 3.8kg per square meter
Thickness : 5.00mm, usage is 6.25kg per square meter
Environmental requirements：The temperature is 5~35℃ and the humidity is 35 ~ 85%RH.
Preparation for Operation：
Tools: The serrated plastic board, brush, 20 Kg MS waterproof coating, Rubber gloves and cleaning tools like blade .etc
Environmental requirements：The temperature is 5~35℃ and the humidity is 35 ~ 85%RH.
Preparation for Operation：
Tools: The serrated plastic board, brush, 20 Kg MS waterproof coating, Rubber gloves and cleaning tools like blade .etc
asphalt, tar, paint, wax, rust, water repellent, curing agent, isolating agent and film. Surface
cleaning can be dealt with by removing, cutting, grinding, cleaning, blowing, and so on.
If there are cracks on the substrate surface, first step is to fill them, and the surface should be
leveled. Operation after the sealant curing more than 3mm.
Theoretical dosage: 2.0mm thickness, 2.5 Kg / ㎡coating needed
Spading Sweeping Blowing
Open waterproof coating and Brushing the part like corner, tubes root, then symmetrical scraping. and painting MS coating
The thickness of the coating is generally 1.5mm. (Avoid bubble).
When operation,It should be considered about the size, shape and environment of the construction
area
Symmetrical scraping when the coating is completely solidified (about 12 hours later). The
thickness of the coating should be 1.5mm, and the direction of smearing should be perpendicular
to the first time. The specific operation is the same as the first step.
Wait for MS waterproof coating to fully cure.
After application
Protection: If necessary, a proper protective layer can be operated on the surface of the coating.
The use of protective layer can better waterproof and prolong the waterproof time.
You can also use no protective layer.
This is a UV resistant waterproof coating.
Why Choose Us
is a professional industry adhesive supplier for 10+ years, with two factories in Shanghai and Suzhou in China. We have R&D team and QC team.and design team.
Sepna’s products have been widely used in the international market, mainly in North America, South America, Asia, Southeast Asia Middle East and Oceania, etc.
Our company mainly produces five kinds of adhesive , SEPNA means the five different materials , S means silicone,E is epoxy, P is Polyurethane, N is Natural resin, A is Acrylic.
Sepna’s products have been widely used in the international market, mainly in North America, South America, Asia, Southeast Asia Middle East and Oceania, etc.
Until now, she has serviced nearly 1000 enterprises all over the world.
Exhibition -OEM / ODM Available
We have a professional design team providing package design solutions for OEM / ODM customers free of charge.
Certifications
We have passed GB/T 19001-2016 IDT IS09001:2015, IATF 16949:2016 quality system authentication, and we can provide ROHS/SGS/ MSDS/PONY. etc, certification of products.
Our Test Instruments
We have imported Raw Materials and Testing Equipment.
We also have Excellent QC Team and R&D Team, and Design Team.
We also have Excellent QC Team and R&D Team, and Design Team.
Samples : FedEx, DHL, TNT, UPS etc.
Cargo : By Sea, By Air, By Railway etc
Cargo : By Sea, By Air, By Railway etc
1.Q: Delivery time? |
A: Normally, the delivery of sample order is 7 to 10 days, for standard order, 15-20 days. |
2.Q: How to get samples? |
A: Normally, Sepna offers our customer 1-2 pcs or 50-100 g free samples for quality testing. |
3. Q: How to be Sepna's distributor? |
A: As the growing of Sepna's global business, we need to find more and more distributors and agents worldwide. Sepna will provide the best solution and service for our partners. For more information, pls contact our salesperson or call us: +86-400-882-1323 |
4. Q: Any OEM service? |
A: Yes. Sepna can offer the customer OEM label service, and will give the protection of the your right in your market. |
5. Q: Do you have MOQ? |
A: Yes. Normally, MOQ is 2000pcs or 1000kgs |
Похожие товары
Новинки - Розница
