Умная автоматическая машина для подачи рыбы с дистанционным
- Категории: >>>
- Поставщик: Zhejiang,Fordy,Imp.,&,Exp.,Co.,Ltd.
Поделиться:
Описание и отзывы
Характеристики
Application Video
Description
AUTO FEEDER CAUSE LESS WASTE AND BETTER WATER QUALITY
Automatic feeders are especially suited to feed the fish and shrimp in pond, which like to eat their food while swimming swiftly in the water. If small amounts of feed are dispensed over a wide area of the water surface at regular short intervals, there is little chance of finding leftover feed on the bottom of the pond. Overfeeding is thus rare during automatic feeding, and pond bottom quality is maintained to the end of the grow-out cycle.
In contrast, during hand feeding, large amounts of feed pellets are applied at once. Some of the feed can remain uneaten for long periods, losing attractants and gradually leaching significant amounts of nutrients to the water. If this feed is not eaten, the concentration of organic matter in the pond will increase, as well as the ammonia concentration at the pond bottom. As a result, dissolved-oxygen values drop and negatively affect shrimp growth, survival and feed conversion.
In contrast, during hand feeding, large amounts of feed pellets are applied at once. Some of the feed can remain uneaten for long periods, losing attractants and gradually leaching significant amounts of nutrients to the water. If this feed is not eaten, the concentration of organic matter in the pond will increase, as well as the ammonia concentration at the pond bottom. As a result, dissolved-oxygen values drop and negatively affect shrimp growth, survival and feed conversion.
Feeding recommendations
If more than one feeder is used in a pond, the feeding machines should be turned on at the same time, so feed is distributed all over the pond at the same time.
Automatic feeding should typically be done during the day, which makes shrimp consume natural productivity at night. If
machines are used 24 hours without supervision at night, oxygen concentrations can drop below normal levels.
Farmers should consider that larger-sized feed pellets are broadcasted farther from the feeding machine and reach a slightly larger radius than smaller-sized pellets reach.
When a wide range of sizes in the shrimp population occurs, small shrimp can be fed manually until the proper amount of feed has been determined. Then automatic feeders should be used again.
In areas of strong winds, it is advisable to place nets on the shores of ponds near automatic feeders so feed pellets do not drop on land.
If a large amount of feed is left in feed trays, and the weather is overcast or rainy, feeders should be turned off for a few hours during the day.
Automatic feeding should typically be done during the day, which makes shrimp consume natural productivity at night. If
machines are used 24 hours without supervision at night, oxygen concentrations can drop below normal levels.
Farmers should consider that larger-sized feed pellets are broadcasted farther from the feeding machine and reach a slightly larger radius than smaller-sized pellets reach.
When a wide range of sizes in the shrimp population occurs, small shrimp can be fed manually until the proper amount of feed has been determined. Then automatic feeders should be used again.
In areas of strong winds, it is advisable to place nets on the shores of ponds near automatic feeders so feed pellets do not drop on land.
If a large amount of feed is left in feed trays, and the weather is overcast or rainy, feeders should be turned off for a few hours during the day.
Details Images
Hot Sell
Company Profile
FUTI Aeroter is established in 1990, can manufacture all kinds of aerators including paddlewheel aerator, impeller aerator, air jet aerator, splash aerator, spraying aerator etc, with more than 200 patents. And after 30 years developing, our aerator products are widely praised by customers from all over the world, with high quality, reasonable price and timely delivery.
In order to provide the good purchasing service and experience to all the clients, we are also trading with some relative items of aquaculture appliances, such as pond feeder machine, floating pump, HVLS ceiling fan, roots blowers, vortex pump, ring blowers, ACO pumt, pond liner, waterproof wearings, etc.
We are trying our best to give all the clients with "One stop shopping experience".
In order to provide the good purchasing service and experience to all the clients, we are also trading with some relative items of aquaculture appliances, such as pond feeder machine, floating pump, HVLS ceiling fan, roots blowers, vortex pump, ring blowers, ACO pumt, pond liner, waterproof wearings, etc.
We are trying our best to give all the clients with "One stop shopping experience".
Certifications
Packing&Delivery
FAQ
1.What's the minimum order qty?
There will be no any MOQ for 220V/50hz/single phase and 380V/50hz/three phase machine.
Other voltage need to be specialized and the MOQ will be 50 units.
2.What's the lead time of production?
Normally, it will take about one month for the production after get the payment.
3.Can do OEM/ODM/OBM brand or logo on the products?
Normally, we will use our brand "FUTI"; and we also accept the private label, the MOQ will be 2000 units.
For more detail information and shipping freight, pls send us the inquiry.
2.What's the lead time of production?
Normally, it will take about one month for the production after get the payment.
3.Can do OEM/ODM/OBM brand or logo on the products?
Normally, we will use our brand "FUTI"; and we also accept the private label, the MOQ will be 2000 units.
More relative aquaculture equipments, pls visit the following website:
www.globalaerator.com
For more detail information and shipping freight, pls send us the inquiry.
Похожие товары
Новинки - Розница
