Контроллер ATS отжимного типа Y 701

Описание и отзывы

Характеристики

Genset ats controller Wiring type ATS controller,funtion use in Utility to Utility or utility to Generator mode type ATS.

Y 701 is our company new model controller insteady old YCU-A,B,D type controller can used in YES1-N,YES1-T,YES1-M,YES1-Q type ATS in Utility to Utility Or Utility to Generator mode.(The later mode must be notice before make the order.)

• This ATS controller have over voltage,under voltage,lost phase protection funtion.

This controller total depth 76mm,installation cabinet depth is 65mm.

 

Main functions:

Automatic and manual conversion:

The panel is provided with an automatic and manual conversion button and the button is self-locking type. Press MANUAL and the manual indicating lamp turns on; press the AUTO and the automatic indicating lamp turns on.

Automatic mode operation:

In the automatic mode, the controller automatically completes the conversion between the two powers according to the power supply situation and the conversion time is set by the panel within the range of 0-30s.

When the two powers are both normal, convert to the main power.

When the main power is abnormal but the standby power is normal, cut off the main power and convert to the standby power; when the main power recovers, cut off the standby power and convert to the main power.

Manual mode operation:

Press the automatic conversion button to set under MANUAL and the manual indicating lamp turns on. When the main power is normal, press A-POWER MANUAL, cut off the standby power and convert to the main power.

When the standby power is normal, press B- POWER MANUAL, cut off the main power and convert to the standby power.