Поделиться:
Features
For high frequencies, a 1” mylar dome tweeter is used especially designed for Chinese market by AUCA Corporation. This tweeter uses Ferrofluid liquid cooling to allow greater power handling. Its scattering range is very wide and with its strong magnetic device and the 2-phase cricuit, it sounds clear.
For midrage and bass frequencies, a long throw 6” paper cone woofer with a butyl rubber surround is used. Its light weight and high-speeded phonation determines the woofer have high sensitivity; and with two inversed-phase piping’s function, the woofer’s low frequency is very strong and deep. No matter what you are listening music or seeing movies or playing games,this woofer can makes you be personally on the scene.
Specifications
Ferq. Response | 50Hz-18,000Hz |
Sensitivity | 90±2dB |
Max. SPL | 105±2dB |
Rated Power | 20W |
Impedance | 8Ω |
Dimension | 90ר228mm |
Weight | 1.3kg |
FREQ.RESPONSE&DISTORTION
Step 1. Press to ascend the method of the diagram trumpet net the crest outs;
Step 2. Cut a Ø 197mm - Ø 202mm installation hole on ceiling as shown above;
Step 3. Connect public address wire to the terminals;
Step 4. Push the loudspeaker into your ceiling, beat with screw tight and install the net.
Step 5. Adjust the direction of the set and examine whether it is steady.