Тест-полоска для овуляции, 10 мин./25 мин., сделано в Китае
US $0.048-$0.29
10 панельных тест на наркотики Safecare Biotech
- Категории: Оборудование для патологического анализа >>>
- Поставщик: Safecare,Biotech,(hangzhou),Co.,Ltd.
Поделиться:
Описание и отзывы
Характеристики
Products Description
The Multi-drug Rapid Test Panel (Urine) is rapid chromatographic immunoassays for the qualitative and simultaneous detection up to sixteen of the following drugs in a variety of combinations in human urine. The designed cutoff concentrations for these drugs are as follows:
Test | Cut-off (ng/mL) |
AMP(Amphetamine) | 1000 |
THC(Marijuana) | 50 |
COC (Cocaine) | 300 |
PCP(Phencyclidine) | 25 |
MOR(Morphine) | 300 |
MET(Methamphetamine ) | 1000 |
MTD(Methadone) | 300 |
BAR(Secobarbital) | 300 |
BZO(Oxazepam) | 300 |
TCA(Nortriptyline) | 1000 |
MDMA(Ecstasy) | 500 |
BUP(Buprenorphine) | 10 |
EDDP(Methadone metabolite) | 100 |
PPX (Propoxyphene) | 300 |
ETG(Ethylglucoronide) | 500 |
K2(Synthetic cannabis) | 50 |
TML(Tramadol) | 100 |
MQL(Methaqualone) | 300 |
COT(Cotinine) | 200 |
FYL(Fentanyl) | 200 |
OXY (Oxycodone) | 100 |
KET (Ketamine) | 1000 |
The test is used to obtain visual qualitative result and is intended for health care professionals use including professionals at point of care sites to assist in the determination of drug compliance
Ideal for :
Pre-employment drug screening
Random drug testing
Medical Clinic Drug Testing
Reasonable Suspicion drug tests
Substance abuse screening in hospitals
Specimen Validity tests to detect specimen adulteration
Pre-employment drug screening
Random drug testing
Medical Clinic Drug Testing
Reasonable Suspicion drug tests
Substance abuse screening in hospitals
Specimen Validity tests to detect specimen adulteration
Product name | Oem/odm Available Safecare Biotech Multi Screen 10 Panel Drug Test Multi Drugs Test |
Configuration | up to 12 drugs for dip,or 14 for cup.(With adulteration or alcohol) |
Specification | strip(3mm or 4mm) |
Formats | dip panel |
Specimen | urine |
Read time | In 5 minutes |
Shelf life | 2 years from the date of manufacture |
Storage | 4-30℃ |
Package | 25 pcs/box，50 pcs/box |
Test Procedure And Result Interpretation
Bring tests, specimens to room temperature (15-30°C) before use.
1. Remove the test from its sealed pouch, and place it on a clean, level surface. For best results, the assay should be performed within one hour.
2. Remove the cap from the end of the test card, and immerse the strip(s) of the test card vertically in the urine specimen for at least 10-15 seconds. Do not touch the plastic device when immersing the panel.
3. Place the test card on a non-absorbent flat surface, start the timer and wait for the red line(s) to appear. The results should be read at 5 minutes. Do not interpret results after 8 minutes.
1. Remove the test from its sealed pouch, and place it on a clean, level surface. For best results, the assay should be performed within one hour.
2. Remove the cap from the end of the test card, and immerse the strip(s) of the test card vertically in the urine specimen for at least 10-15 seconds. Do not touch the plastic device when immersing the panel.
3. Place the test card on a non-absorbent flat surface, start the timer and wait for the red line(s) to appear. The results should be read at 5 minutes. Do not interpret results after 8 minutes.
POSITIVE:Only one colored band appears in the control region (C).No apparent colored band appears in the test region (T).
NEGATIVE:Two colored bands appear on the membrane. One band appears in the control region (C) and another band appears in the test region(T).
INVALID: Control band fails to appear. Results from any test which has not produced a control band at the specified read time must be discarded. Please review the procedure and repeat with a new test. If the problem persists, discontinue using the kit immediately and contact your local distributor.
NOTE:
1. The intensity of color in the test region (T) may vary depending on the concentration of analytes present in the specimen.Therefore, any shade of color in the test region should be considered negative. Note that this is a qualitative test only, and cannot determine the concentration of analytes in the specimen.
2. Insufficient specimen volume, incorrect operating procedure or expired tests are the most likely reasons for control band failure.
NEGATIVE:Two colored bands appear on the membrane. One band appears in the control region (C) and another band appears in the test region(T).
INVALID: Control band fails to appear. Results from any test which has not produced a control band at the specified read time must be discarded. Please review the procedure and repeat with a new test. If the problem persists, discontinue using the kit immediately and contact your local distributor.
NOTE:
1. The intensity of color in the test region (T) may vary depending on the concentration of analytes present in the specimen.Therefore, any shade of color in the test region should be considered negative. Note that this is a qualitative test only, and cannot determine the concentration of analytes in the specimen.
2. Insufficient specimen volume, incorrect operating procedure or expired tests are the most likely reasons for control band failure.
More Products
Production Process
About Us
Product packaging
Customer Reviews
FAQ
1: Are you a manufacturer?
Yes, we are manufacturer based in Hangzhou,China with 531 workers, 30000 square meter non-dust workshop,advanced automate machines and professional R&D team ensure the high quality, speedy delivery and large production capacity.
2: Can we put our logo/text on the products or package?
Yes, we can do OEM or even ODM. All of our products can be customized.
3: Can you provide free samples?
Yes, free samples are available.
4: How long is your production time?
Our production time is usually two weeks after receiving the deposit and four weeks for one container order quantity.
5: What is the MOQ?
Small quantity like 3000pcs is available.
6: How to make the payment?
By T/T, L/C, Paypal, Western union and Alibaba trade assurance order is also acceptable.
Yes, we can do OEM or even ODM. All of our products can be customized.
3: Can you provide free samples?
Yes, free samples are available.
4: How long is your production time?
Our production time is usually two weeks after receiving the deposit and four weeks for one container order quantity.
5: What is the MOQ?
Small quantity like 3000pcs is available.
6: How to make the payment?
By T/T, L/C, Paypal, Western union and Alibaba trade assurance order is also acceptable.
Похожие товары
Новинки - Розница
