Пленка для окон автомобиля Eaglevinyl PET 50% Vlt черная зеленая устойчивая к царапинам термостойкая


Поделиться:

Цена:*
Стоимость в USD (на сегодня):Узнать

Количество:

Описание и отзывы

Характеристики



Eaglevinyl PET Anti-Scratch Car Window Film Tinting Tint Roll


Name
Eaglevinyl PET Anti-Scratch Car Window Film Tinting Tint Roll
Item NO.
ALL Color
Brand
Eaglevinyl 
IR Transmittance
1%- 50%
Size
1.52X30M
VLT
1%- 70%
Material
High-performance PET
Adhesive
Removeable adhesive
Thickness
2mil
Stand up against
Water, heat, dust, grease, salt, weak acids oil


Our Advantages


1.High UV-Rejection
Brocks more than 99% damaging UV rays. 
2.Reduce Heat and Glare
Provides a better driving and Increase comfort for your and your passagers 
3. Safety and security
In the car accident, prevent the glass splash. 
4. Energy Saving 
after the installation of car window solar film, it can significantly reduce the temperature inside the vehicle in summe 
5.Enhance Style and Appearance 
provides privacy and keeps your valuable safe from prying eyes.



Product Picture














Customer Photos






Installation Instructions


Tools For Wrapping: 
Snap-Off Blade Knife, Straightedge, Triangle hard scraper, Soft Squeegee, Sprayer

1. Film Cutting.
Cut Paper Pattern on outside glass. Trim film to fit that paper pattern.

2. Make soapy water solution
Mix 5-10 drops detergent with 500g water in Sprayer. Well-proportioned them by shake the sprayer up and down.

3. Clean window
Spray soapy water on glass and scraping the glass by soft squeegee. From top to bottom or left to right. Do it again by 2-3
times. (Make sure the glass is clean)

4. Separate film from liner.
Peel film apart from backing. Spraying water on adhesive while peeling just to prevent films sticking together.

5. Place film on glass.
Spray some soapy water on adhesive and glass. Then place film on glass to the exact place. (More soapy water, easier to move film during installation).

6. Scrapping
Spray soapy water solution on film surface and squeegee firmly to wipe out all the water.
The liner can be put on the film during scrapping to prevent film from scratching.
It should be scrapped from middle to both sides. Lightly scrap at first, squeegee firmly after the film is fixed on the glass.
The scrapping will be finished once all water wiped out.

7. Trim film with new sharp blade, leaving 1/16” gap around edges

8. Drying time 3 days in full sun





Our Services


1.OEM&ODM are welcome, Factory directly, over 10 years experience.

2.After sending out cargo, tracking number would be offered, so you could know where your cargo is.

3.After you received the goods,any further questions,you can feedback to us for help,such as: the installation steps.

4. All your requirements will be replied within 24 hours.

5. Constantly push some new designs to the market every month.



Contact Us





Новинки - Розница

0.0294 s.