Поделиться:
ATS Controller for generator
Feature
1.Over voltage/under voltage/lack of phase/reverse phase/over frequency/under frequency protection.
2.With automatic and manual state switching
3.Suitable for multiple wiring types:Such as Three phase four wire,three phase three wire,single phase two wire,two phase three wire.
4.With Switch Reclosing and Power off again buckle function.
5.Timing put on/ off generator set.
6.Modular structure design,Flame retardant ABS shell,Plug and socket terminal,Embedded installation.
Specification
Work Voltage | 1.DC8.0V to DC35.0V, 2..HTS220/HWS560 power module power supply(when no accumulator power supply). |
Power Consumption | <3W(standby:≤2W) |
Input Alternator Voltage | |
3-Phase4-Wire | 80V-625V |
3-Phase3-Wire | 80V-625V |
Single-phase2-wire | 50V-360V |
2-Phase3-Wire: | 80V-625V |
Alternator Frequency | 50/60Hz |
Start Relay Output | 16Amp 250V AC Passive Output |
Programmable Relay Output | 16Amp/7A 250V AC Passive Output |
Digital quantity input | ground connection valid |
Communication mode | RS485 isolation port,MODBUS protocol |
Outline dimension | 211mmx155mmx55mm |
Hole size | 186mmx141mm |
Operating conditions | :temperature:-25 to 70 degree centigrade,humidity:20-90%; |
Storage conditions | temperature:-30 to 80 degree centigrade |
Protection Level | IP55:When waterproof rubber seal installed between the controller and panel fascia. |
IP42:When waterproof rubber seal is not installed between the controller and panel fascia. | |
Insulating Intensity | Object: input/output/power |
standard: IEC688-1992 | |
Test way: AC1.5kV/1min leakage current:3mA | |
Weight | 0.8kg |
1 |