Поделиться:
Feature | |||
1 | Thermal paper up to A4 | ||
2 | Group3 analog fax CLASS 1&2 | ||
3 | GSM/PSTN dual mode | ||
4 | GSM SMS printed | ||
5 | Copier | ||
6 | LCD display call ID | ||
7 | No-paper storage capacity 40 pages | ||
8 | Vehicle adapter power | ||
9 | PC Scanner and printer | ||
10 | GSM G3 analog fax class 1&2 | ||
11 | PSTN fax and telephone | ||
12 | Copier | ||
13 | GSM telephone call | ||
14 | A4 thermal paper | ||
15 | No-paper received capacity to 40 pages | ||
16 | Special design power for vehicle | ||
17 | Mount and mobile easily | ||
18 | Standard GSM mini SIM card | ||
Outside accessory | |||
1 | AC Adapter power | ||
2 | Input: 220v 50/60Hz | ||
3 | Output: 24v 2.0A | ||
4 | Vehicle power supply | ||
5 | Input: 12/24V | ||
6 | Output: 24V 2.0A | ||
Working in | |||
1 | GSM/GPRS/EDGE | ||
2 | 900/1800MHZ GSM Phase 2+ | ||
3 | 850/900/1800/1900MHZ | ||
4 | PSTN | ||
5 | SATELLITE Terminal connected | ||
More | |||
1 | Mobile and fixed easily | ||
2 | Fax/Voice/auto mode | ||
3 | GSM/PSTN auto switch | ||
4 | Small volume &weight | ||
5 | 220V adapter is standard | ||
6 | 12/24V vehicle adapter is standard | ||
7 | For car、ship、mobile house And portable design | ||
8 | Be fixed on vertical plane Easily | ||
OPTIONAL | |||
1 | Special antenna | ||
2 | Emergency backup battery | ||
3 | Special fixed packet for fax and pc In vehicle | ||
4 | optional 4G Router with LAN and WIFI | ||
Model | |||
1 | Support GSM G3 analog fax and PSTN /SATELLITE | ||
2 | 900/1800 GSM Phase 2+ | ||
3 | 850/900/1800/1900 GSM Phase 2+ | ||
4 | PSTN | ||
5 | SATELLITE | ||
Specification | |||
1 | GSM air interface standard | ||
2 | GSM 850/900/1800 Phase 2+ | ||
3 | PCS 1900 TIA/EIA J-STD-007 PCS 1900 | ||
Transmit Power | |||
1 | EGSM 900:2W | ||
2 | DCS1800/PCS1900:1W | ||
Frequency Ranges | |||
1 | GSM850 824-849MHZ 869-894MHZ | ||
2 | EGSM900 890-915MHz 935-960MHz | ||
3 | DCS1800 1710-1785MHz 1805-1880MHz | ||
4 | PCS1900 1850-1910MHz 1930-1990MHz | ||
Dimensions and Weight | |||
1 | 288 x 188 x 96mm | ||
2 | Less 1.6kg | ||
Antenna | |||
1 | GSM 900/1800: 3dBi dual band | ||
2 | GSM 850/1900: 3dBi dual band | ||
3 | Optional higher gain antennas available | ||
SCAN | |||
1 | Contactor Image Sensor | ||
2 | Level:8PPM | ||
3 | VER:7.7RPM (fine) 3.85RPM (standard) | ||
4 | Printer: Thermal | ||
5 | Printer width: 210/216MM*30MM | ||
6 | Fax DCS: MH、MR、H2 |
Package Dimensions (According to package size) | 48*39*24 (cm) | ||
Gross Weight | 10 KG/ Unit Type | ||
Packaging Type | white box (optional color gift box with additional cost), 10sets in one carton. Export standard Carton package, optional packed with pallets. |
Frequently Asked Questions :
If any problems are encountered while using the phone, please refer to below items. If the problems still exit, please contact the Distributor or the Network Operator.
Q. “Enter PIN code" appears on the screen.
A. Enter valid PIN code of your SIM card. Please contact your Network Provider immediately if you do not know the code.
Q. “Enter PUK code" appears on the screen.
A. Your SIM card will be locked if you enter wrong PIN code for three times. To unlock your SIM card, you have to enter PUK code. Please contact your Network Provider immediately if you 77 do not know the code.
Q. “Insert SIM card" appears on the screen.
A. Make sure SIM card is correctly installed. Check if SIM card works properly. It may be defective or faulty. Please contact you Network Provider.
Q. “Not in service area. Network failure.” is displayed.
A. Check signal indicator. If there is no signal, you may be in the basement or network blind area in a building. Please move to other locations to receive signal. Or potentially you are not in coverage area. If so, please contact your Network Provider for assistance.
Q. Poor sound quality, echo or noise makes communication difficult.
A. Hang-up your phone and dial again. The Network may connect the phone to a line with better communication quality.
Q. Standby time declines.
A. Signal at your location is weak so that the phone has to search signal for a long time. When you don’t want to answer any calls, please power off for a time being. It is also possible that the battery has been used for a long time and approaches its life-span. In this case, please replace the battery.
Q. Phone fails to boot. 78
A. Your battery is potentially not charged. Please charge your phone until the battery power is restored, then try to power on again.
Q. Cannot send short messages.
A. Please check the SMSC address if the correct number has been set. Perhaps the recipient contact number is invalid. 79
Q. Cannot charge. A. There are three possibilities: • Charger of your phone does not work properly. You can contact nearest service provider or dealer; • Ambient temperature is not appropriate. Please change charging environment; • Poor contact. Please check plug of your charger.
Q. Cannot add entries into phonebook
A. Phonebook is full. Please delete some useless entries.
Q. Cannot select some functions
A. The service is not available or the location network does not support this service. Please contact your operator for details.
Q. What is the purpose of the Com Port option when the device is connected via USB?
A. The Com Port is mainly used for Software Upgrades when new versions are released and debugging by the supplier.
Q. How to find the IMEI No. of the Phone?
A. You can enter the command “*#06*” to show the IMEI No. on display.
Q. How to find the firmware Version No. of the Phone?
A. You can enter the command “*#0000#” or “*983*833#” Then the Firmware version will show on the display.
Q. Who can I contact for technical support?
A. You can call Local Customer maintenance Center or send email