Центрифуга для бурения нефтяных месторождений и жидкостей
US $37000-$38500
Корпусы фильтров для мешков воды из нержавеющей стали используются в косметической
- Категории: Оборудование для производства косметики >>>
- Поставщик: Hangzhou,Tianshan,Precision,Filter,Material,Co.,Ltd.
Поделиться:
Описание и отзывы
Характеристики
Stainless steel water bag filter housings are used in cosmetics industry
Product Description
Bag filters is to remove suspended particulate from water and other process liquids. Contaminants such as pipe scale, grit, wax, metal chips, rust, and airborne debris are found in a broad range of particle sizes. PEP offers a variety of bags to capture particles ranging from 0.35 to 800 microns.
These multi basket strainers and bag filters offer a wide range of flow capacities and contaminant-holding capabilities. They contain from 2 to 23 baskets.
To serve as a strainer, a unit is ordered with perforated stainless steel baskets (mesh-lined if desired). When ordered as a filter, it’s fitted with perforated stainless steel baskets designed to hold disposable or cleanable filter bags. Industry-standard size bags are used: the standard 30 inch baskets accept bag size 2, the optional 15 inch baskets take size 1.
Main advantages
01.Small probability for side-bag leakage , which effectively guarantee the filtering quality.
02.Bag type filter can bear greater working pressure, it is of small pressure loss,low operation cost and obvious energy saving .
03.Accuracy of filtration bag increased continuously, it could reach 0.5 μm at most.
04.Bag type filter large handling capacity, small volume, containing a large quantity of pollutants.
05.Based on the working principle and structure of Bag type filtering system,which is convenient to replace the filter bag and without cleaning,and time saving and labor saving.
06.Filtration bag could be use repeated after cleaning to save cost.
07.bag filter application scope is broad, with flexible operation and multiple installation .
Welcome to inquiry more detail .
Email:lyy(at)tsjmlc.com Whatsapp:+86 18356516590
Specifications
Technical parameters
| Design pressure: 0.96MPa 30min |
Maximum working pressure:0.60MPa | |
Surface smoothness:Ra≤0.2 | |
Design flow rate:Ra≤0.2 | |
Inlet&outlet type thread or flange | |
Type:single bag & multi bag filter housing | |
Designed for bag filtration system
| Different kinds of bag support baskets to fit for |
wide range of filter bags | |
Complete stainless steel structure | Made of 100% SUS304, SUS316L, PP |
Easy to clean
| Surface is mechanical polished or sand blasting passivation. |
dished end to aid clean down |
Specifications for single bag filter housing
| No. | Size | Diameter | Length | inlet&outlet | Filter bag | Flow rate |
| Code | (mm) | (mm) | size | (m/h) | ||
| 1 | BJD1 | 220 | 550 | 2" thread, clamp, flange | 1 | 20 |
| 2 | BJD2 | 220 | 950 | 2" thread, clamp, flange | 2 | 40 |
| 3 | BJD4 | 130 | 650 | 1" thread, clamp, flange | 4 | 10 |
Specifications for multi bag filter housing
| No. | Size | Diameter | Length | inlet&outlet | Filter bag | Flow rate |
| Code | (mm) | (mm) | size | (m/h) | ||
| 1 | BJD2-2 | 400 | 1600 | 3" thread, clamp, flange | 2*2 | 80 |
| 2 | BJD2-3 | 500 | 1600 | 3" thread, clamp, flange | 2*3 | 120 |
| 3 | BJD2-4 | 550 | 1600 | 4" clamp, flange | 2*4 | 160 |
| 4 | BJD2-5 | 600 | 1600 | 4" clamp, flange | 2*% | 200 |
Ordering Guide
| PRODUCT | Bag Size | Bag Q'ty | Inlet/Outlet | Connection | Surface | Materials | |
| BJD | 1 -#1 bag | 01 - Single | A- side in and side out | K-coupling | S- sand blasting | 304 | |
| 2 - #2 bag | 02 - Two | B- side in and bottom out | F-bolt | T- polished | 316L | ||
| 3 - #3 bag | 03 - Three | C- bottom in and bottom out | S- thread | PP | |||
| 4 - #4 bag | 04 - Four | D- top in and bottom out | How to order ?-example | ||||
| 5 - #5 bag | 06 - Six | Bag size: #1; Bag Q'ty: Single | |||||
| 6 - #6 bag | 08 - Eight | Inlet/outlet: side in and side out | |||||
| 7 - #7 bag | 12 - Twelve | Connection: coupling | |||||
| X - other size | Surface: sand blasting | ||||||
| Material: SUS304 | |||||||
| Selection code is: BJD101AKS304 | |||||||
 |  |  |
Operating Conditions(Bag Filter):
Max.Operating Pressure: 6 bar(87psi) , 10.34bar(150psi)
Max.Operating Temperature: 120°C
Applications:
1. Pre-treatment for various kind of water
2. Used in RO system ,EDI system and UF system,etc.
3.Used for paint, beer, vegetable oil, pharmaceuticals, chemicals, petroleum products, textile chemicals, photographic chemicals, electroplating liquid, milk, mineral water, thermal solvents, emulsions, industrial water, syrup, resin, printing ink, industrial waste water, fruit juice, edible oil, wax, etc.
About us
Our service
1,24-hour Response
We responds any request from our clients within 24 hours, saving your time and labor.
2,Supporting System
The system consists of claims systems, technical support system, inquiry system and ordering following system. The system will provide after-sales service in full range.
3,Free Training
We provide free training to all of our clients and distributors. The training will give you ample knowledge of our product, and make it easy for your work.
4,Free Storage Area
We are providing free storage area to our client,to achieve mix loading purposes.
FAQ
1 How can we get the quotation of flter cartridges
Kindly please let us know the specifications,such as the material,length,micron,adapter,apply in which industry.....
2What's the minimal quantity requested?
We do not the requirement on teh minimal demand.Thank you.
3How long about your delivery ?
The order is always arranged in 10 working days as soon as receiving the deposit or payment
Packaging & Shipping
contact us
Sales Enginner : Nina Liu
Whats app:+86 18356516590
EMail: lyy(at)tsjmlc.com
Skype:andrea.liu54
Best wishes!
Похожие товары
Новинки - Розница
