Water based non stick cookware PTFE coating spray PF-600
Description
PF-600 is designed with two-layer coating system. Thanks to its high density, good inadhesion, easy-to-clean performance and strong practicability. It is applicable for substrates like aluminum, alloy and stainless steel etc.
Type
Water based fluororesin
Key Features
l Eco-friendly
l Excellent heat resistant
l Excellent chemical resistance and abrasive resistance
l Excellent and lasting non-stick performance, easy to clean
l Store products in tightly closed original containers at 5-35℃
l Shelf life: 6-9 months from delivery date
l According to non-dangerous goods transport
How to use
1. Requirement on pre-treatment
l Firstly, apply high-temperature degreasing, then wash with 1%~3% NaOH solution (60℃) for more than 6 minutes, dry it after water rinsing;
l Blast with 80#~120# corundum to make the surface roughness reach 2.0μ~3.0μ, pay attention to sandblast evenly;
l Wash with 1%~3% NaOH solution(60℃) for more than 6 minutes, rinse with water;
l Wash with 1%~3% hydrochloric acid solution (60℃) for more than 6 minutes, rinse with water and dry.
2. Preparation of the coating
l Dispersion of coating: the coating must be fully dispersed before operation;
l Viscosity adjustment: the viscosity could be adjusted according to different spray methods. Dilute with clean water if the viscosity is over high;
l Coating filtration: filtrate the coating with screen (100mesh) before using.
3. Application
l The spraying environment should be dry, well-ventilated, no smoking and fire. We suggest using dedicated spray gun, elevated tank and curing oven;
l The air compressor should be degreased, dewatered and equipped with water oil separator before using;
l Roll the coating at 30rpm speed before using to make sure there is no sediment, and filter with 100 mesh screen;
l Adjust atomization and oil pump capacity of the spraying gun; make sure the unit is clean and flat;
l Preheat the substrate to 35℃ and spray the primer. Dry it at temperature of 120℃~150℃ for 10min-15min. Keep the thickness of primer within 12μm-18μm;
l Spray top coating after the primer is dry and cooling to room temperature, then spray the top. Dry the unit at the temperature of 100℃~150℃ for 10~20 min, and gradually increase the temperature to 380℃~420℃. Keep for 10 min. Keep the thickness of top coat within 10μm~12μm. The thickness of two coat tally should be between 20μm~30μm;
l The oven (or the tunnel drier) must be well ventilated; otherwise, it will lead to color change of coating.
Non-stick Type
↓ ↓ ↓ Please click product model for more informations
1. Three times inspection during one production flow.
2. We can provide technical support and free samples within 500 grams.
3. We can according to the parameters given by the customer and individual demand custom-made products that meet the customer requirement.
4. For any other question, please send them to our service Email or chat with us online.
FAQ
1. Q: What is your MOQ?
A: 240 cans or 100L.
2. Q: Can I do an OEM?
A: Yes, we do the brand, logo as your requirements.
3. Q: What is the how much can one litre cover?
A: about 8-15 sqm per liter.
4. Q: Exactly what surfaces can each type be applied to?
A: PF-301 is used for textile, leather, shoes, etc. PF-302 is used for wood, concrete, stone, rooftile, brick etc. PF-303 is used for glass. PF-304 can be used for glass and car body.
5. Q: Can we visit your factory?
A: You are warmly welcomed to visit our factory, it would be our great pleasure!
