Оптовая продажа алюминат стронция светящийся в темноте пигментный порошок неорганический пигмент фотолюминисцентный для дорожной

 Products details:

1. Model: JPG-384

2. Color: yellow-green in the dark, is yellowish in the day.

3. Intensity afterglow: 3611—1min, 498—10mins, 69—60mins.

4. Features: non-toxic, non-radiation, harmless, Tasteless, absorbing light time is short, afterglow time is long. easy to get light source. stable physical and chemical characteristics.

Fast absorption:

You can quickly experience the colorful nightlife.

Long afterglow intensity:

8 hours of light, you can find the direction in the dark

Long life:

Repeated absorption, your product can be used for 15 years, saving costs for you.

Using introduce:

1. How to choose coating: General Please choose transparent coating (commonly known as light oil) and transparent paint (commonly known as varnish) to mix with glow powder. (Different objects choose different transparent coating. Such as objects is metal material, please choose metal ink. If objects is PVC PVC, please should choose PVC ink.). Colorless transparent, good light transmittance, no UV resistance; the organic solvent series of varnish, good light resistance, good weather resistance, stable chemical properties, good adhesion (according to the selection of different substrates). 

2. How to choose Glow in the dark pigment powder: please choose the brightest glow in the dark pigment powder.

3. How to operate: The proportion of the glow in the dark pigment powder can be adjusted by the weight of 1:1.

1). The firstly You should add a glow in the dark pigment powder and then slowly adding coating or solvent, when coating or solvent covered glow in the dark pigment powder, please stop. 2). after about half an hour to 1 hours (how much time waiting is, according to the situation) When glow in the dark pigment powder can be fully wet by coating or solvent, then add the remaining coating or solvent, then mixing. This process will avoid producing bubbles. 3). Before brushing the glowing coating, to add a white substrate on the surface objects or directly brush the glowing coating on white material, which can improve the brightness and extend light time. If the bottom color is dark, the brightness will be reduced. 4). To suggest: Glowing coating layer After drying, brushing a layer of varnish with good water resistance for improving water resistance and surface smooth of products.

4. Glow coating can continue to shine for more than a few hours in the dark after absorbing any visible light. With high heat resistance, wear resistance, suitable for all kinds of surface paper, textile, wood, plastic, metal, pottery and other materials.

 Note: Can not to polish glow powder, that will reduce its brightness. In the process of configuration, can not to touch with iron products, have to choose glass or plastic containers, and do not use heavy metal compounds as additives. By hand or high speed agitation can be used to make the glow ink paint as uniform as possible.

Can not touch with water. So if it is water-based ink or paint, it can not be stored. Mixing when used.

 Other color:

Shipping:

1. We can provide sample customization services.

2. We can provide your packaging and label.

3. We can provide technical guidance.

 Juliang Photoluminescent Pigment CO., LTD is a high-tech enterprise. Its predecessor,Foshan Ximin glow powder Technology CO., LTD, was founded in 2003. We had been specializing in researching, developing and producing photoluminescent materials and auxiliary products for 15 years. 

  Our products can glow in the dark for at most 12 hours after absorbing visible lights for 20 minutes. This technology had been in the national high-tech project in 1999. In addition, our company also provide other high-tech products such as thermochromic powder and photochromic powder, etc.

 Based on 5 advanced production lines and special processing technology, Juliang glow powder are all non-toxic, with stable physical and chemical properties. As a high-tech enterprises, we have established our own quality management system and obtained the SGS and MSDS certification. Now our company glow powder have been widely used in building decoration, traffic signs, military equipment, fire prevention, industry, daily necessities, aerospace industry and other related fields. After 10 years of development, our company's products have been exported to North America, European Union, Japan, south Korea, the Middle East, Southeast Asia and other regions. We will continue adhering to the purpose of "customers first, credibility first and quality first", and strive to become excellent supplier of luminescent material.

Our Production Equipment:

Our Tests:

Our Certification:

Q1: Do you have these glow powder? Blue, green, red, orange, white, azure, purple.

A: Yes, we have. And also have 8 colorful glowing powder.

Q2: I want more details about this product.

A: Glow color in the dark: Blue, green, red, orange ,white, azure, 8 colorful.

   Powder color in the day: Yellowish and colorful.

   Glow time: 8-12 hours, it is weak hour by hour.

   Life: 15 years.

Q3: What is minimum?

A: According to your need. But if quantity is more, price and shipping cost have a discount.

Q4: Can I get sample for testing?

A: Yes, we can provide 10-50gs free sample to you, but you need to pay shipping cost.

Q5: What kind of solvent can be maxed with your powder?

A: Any solvent can, but need to distinguish between water-basted and oil-based solvent. We have waterproof glow powder.