Виниловый маленький 3d-фон для украшения

Item name: 3D small check wall backsplash for wall decor

Material: PET+PU glue

MOQ: 200pcs each design

3D small check wall backsplash for wall decor.

1. Life time 5- 10years.

2. Water-proof ( No problem always under the watering when use in the wash room. )

3. Heat resistant ( Maximum 80℃ ), Cold resistant ( Minimum -40℃ )

4. Moisture-Proof.

5. Mould-Proof.

6. Peel and stick easily, easily to install and maintain, every one can DIY at home.

7. Never Edge warping.

8. No degumming.

150pcs / carton  12.5-13kg / carton  29*27.5*25cm  / carton

Shipping by: DHL / UPS / Fedex / By air / By Sea

Packing list:   150pcs/carton   12.5-13kgs/carton   29*27.5*25cm

Packing way:  Poly bag+opp bag  6pcs / pack 8pcs / pack  10pcs /pack depend on your choose

Wall sticker tile size: 10*10 inch /10*10.5 inch / customized size

1-Thoroughly clean surface to remove dirt and grease.Allow enough time for the surface to dry completely.

2-Use a pencil or chalk to measure and mark a guideline to the portion where the first tile will be applied to.

3-Using a (pair of Scissors) and / or (Utility Knife guided by a Straight edge), cut the tile to desired

shape/size. please ensure to cut the overlapping tabs and grout line prior to installing if desired)

4-Peel off back of the tile,then install.Press firmly (including the edges) to prevent lifting.

5-Remove the front plastic film.

6-Starting second tile,overlap the grout line of the edges during installation.

7-Repeat process for the remaining area.

8-Allow 24 hours to cure.

Thank you for your purchase of our “Peel and stick Backsplash Tiles”!

It is a convenient and cost-effective “Do-it-yourself” alternative to backsplash projects

Here are several benefits of our Poly-Vinyl with Epoxy Finish tiles:

1-You can easily create a stylish NEW LOOK for your kitchen,Bathroom,Office,Display Rooms,Workplace,and More..

2-These Poly-Vinyl with Epoxy Finish 3D Tiles add exquisite style to their environment,while offering economic,and time-saving convenience.

3-They can be bent and cut to desired shapes and designs for easy application.

4-Surfaces will not crack.

5-The soft 3D surface offers wear-resistant,waterproof,and non-slip characteristics to prevent your walls from damage.

6-Easy to clean with a damp cloth,or mild detergent.

7-Self-Adhesive Backing won’t lift,peel off,or change color.

8-High quality and Eco-Friendly,which are made to LAST!

Surfaces Suitable for Application:

-Glass

-Acrylic

-Ceramic

-Melamine

-Flat Panel Dry Wall

-Water Proof Surfaces

 Surfaces NOT Suitable for Application:

-Rugged Wall

-Unflat Wall

-Oiled Wall

-Unclean Wall

-Moldy Wall

-Cracked Wall

-Freshly Painted Wall

Caution:

1. For gas ranges without a back control panel or metal plate, a safety zone (without wallskin) of at least 18" (46cm) must be preserved to avoid direct exposure to open flames;

2. For small appliances like toasters, counter ovens, etc., leave a safety clearance of at least 3" (8cm) between the wallskin and the appliance;

3. Do not use abrasive-cleaning product to clean;

4. Do not use in shower;

5. Do not touch the adhesive with the fingers;

Installation is a very simple and can be completed without the use of any special tools or prior knowledge of fitting vinyl stickers. Our printed designs can be installed by carefully removing the top layer of the backing sheet, offering up to the tile then gently smoothing the rest of the graphic down with your fingers or squeegee.

You can remove your tile stickers at any point by simply warming the design with a hairdryer to reactivate the glue and then by using a peeling motion to peel back the transfer from the surface. If a little glue is left behind then this can easily be wiped away.

Shenzhen Exploiter Epoxy Co. Itd is established in Aug 16^th 2011 which located in Baoan Shenzhen with about 2300 square meters , we have about 50 workers, our main products are Epoxy wall tiles, Epoxy mobile phone cases, 3M vinyl skin stickers, Game console skin sticker and laptop skin stickers, we have 3 epoxy machines, 3 printing machines, 3 silk printing machine, 2 films transfer machines, 3 small punch machines and 1 big punch machine. 3d epoxy wall tiles is our hot selling product, it is a new kind of wall tile which are used for kitchen, bathroom, washing room and dinning room walls, our product advantages are easy to install, without labor installation cost, waterproof and easy to clean, we sell to USA, Canada, Norway, Romania, Netherlands, Korea and so on countries, our factory passed Disney ILS certification.

1: Quality: we are the first chinese manufacture to make this product, we have patent of it. Our material is imported from Germany

2: Capacity per month: 300,000pcs

3: Certification: we have ROHS, Disney ILS certification, Patent certification

4: experience: we have more than 10 years experience in doing exporting business

5: warranty: 5-10 years warranty

Contact name: Hajar Wang

Email: sales(@)wallskin.cn 

Tel: +86-0755-81736119

Catalog link for you to choose designs: http://exploiterskin.x.yupoo.com/

Facebook link: https://www.facebook.com/Shenzhen-Exploiter-Epoxy-CoLtd-485094088542517/