Полиуретановое водонепроницаемое покрытие на водной

 Instruction

Single component waterproof coating polyurethane is single component, a new type of eco friendly waterproof coatings without solvent with the features of high elasticity and durability.

Technical data

(More colors available)

Uses

1. Flat, stand, cant roof of building, lavatory bath room, swimming pool, gutter and afforest roof.

2. Underground construction: concrete floor, beam, shear wall, retaining wall, elevator shaft, etc.

3. Subway, ditch, underground structure, all kinds of pools.

Features
1.Simple application, reliable performance, no joint gap.

2. Polyurethane waterproofing coating is with good cold & heat resistance, grease proof, waterproof ,corrosion resistance.

3. Polyurethane waterproofing coating is with good firm adhesion and good elongation.

4. Good waterproofing, not dissolved in water, and it can be used together with cement and talc powder.

Basic requirement:  

The surface to be waterproofed must be structurally sound and free from dirt, dust, grease, paint, wax, laitance and all other contaminants, the protrusions must to be ground flat. Holes and voids shall be filled with Patch & Anchor. Cracks and junctions in building surfaces shall be evenly. New concrete structures need to dry for at least 28 days. Old, loose coatings, dirt, fats, oils, organic substances and dust need to be remove.

√ If need primer then mix the water and polyurethane coating at 1:3 by weight , stir evenly.

√ Applied by brush or roller, usually brush or roller or spray machine for 3~4 times, total thickness reaches to 1.5~2.0mm.

Precautions 

 Before apply the waterproof coatings must be stir evenly.

 Do not apply if the temperature below 5℃ or exceeds 35°C

 Do not apply if rain or snow.

Q: What is the minimum order quantity?

A: 1ton

Q: What is delivery time?

A: About  7 days depend on quantity required after deposit. Except public holidays.

Q: How can you guarantee the quality?

A: We have rigorous quality test system, from raw materials to finished products, the materials must be

inspected and signed by QC staff.

Q: How long can I get a quote?

A: The quotation could be provided within 24 hours once we know all detailed requirements.

Q: Can I get a sample?

A: Yes free samples are available. Delivery cost is to be paid by clients.

Q: Can you provide OEM service?

A: Yes, we can produce under your own brand name. Logo and packing design need to be provided so

as to make customized brand name.