Прямая поставка розетка инфракрасного датчика движения PIR автоматические светодиодные переключатели E27 патрон лампы

Product Details

The light will be lighted when somebody comes, and the light will be turned off when he leaves.

Product Details

Energy saving, no contact, long life, no pollution, safe and reliable.
The product design using special sensor to detect body heat release infrared spectral variation, the switch is automatically switched on load, with people not to leave and sustained activity, load continued to work, after people leave, switch delay, automatic off load.
This product uses a light control device, with automatic metering function. (switch to work under the condition of weak light).

Product Details

Rated voltage:AC180-240V
Light Sensitivity:≤5-7LUX
Sensing distance:≤8M Material:PC
Sensor angle:360°
Load power:Energy-saving lamps< 60W LED lamps< 20W
Delay time: 60S (Don't apply to incandescent lamp)
Size:86*86*37MM
Work environment:-20°C~40°C
Installation height :1~2M
Approvals/Certificates:  CE RoHS
Ingress Protection:  IP50
Warranty: 2 years

Product Details

This product adopts the international standard 2 wire connection mode.The switch must be installed as shown in the diagram.
Short circuit and overload use is strictly prohibited.
When installed at the first time with enough light,flash three times and then automatically shut off is a normal phenomenon.
First installation, energized for the first time about one minute to be automatic put out, is a normal phenomenon.

Q1. Can I have a sample order for led light?

A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.

Q2. What about the lead time?

A:Sample needs 3-5 days, mass production time needs 1-2 weeks for order quantity more than 

Q3. Do you have any MOQ limit for led light order?

A: Low MOQ, 1pc for sample checking is available

Q4. How do you ship the goods and how long does it take to arrive?

A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Airline and sea shipping also optional.

Q5. How to proceed an order for led light?

A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.

Q6. Is it OK to print my logo on led light product?

A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.

Q7: Do you offer guarantee for the products?

A: Yes, we offer 2-5 years warranty to our products.

Q8: How to deal with the faulty?

A: Firstly, Our products are produced in strict quality control system and the defective rate will be less
than 0.2%.
Secondly, during the guarantee period, we will send new lights with new order for small quantity. For
defective batch products, we will repair them and resend them to you or we can discuss the solution i
ncluding re-call according to real situation.