Weroom XPS душевая кабина из

XPS foam shower tray is made of extruded polystyrene, faced on both sides with a fiberglass mesh embedded into a thin cement polymer mortar, it has a 0.5mm coating on either side, with min 2% slope and a hole pre-cut, tiles can be fit according to the slope easily. And for different drains we can open the hole to suit for the drains. So this kind of tray can widely use in bathroom with any shower drains. Furthermore, it is easily to be cut into anysize or shape to suit the shower area. Since it is ready to tile, the shower floor can be easily match surrounding decoration. And the shower tray are available in a number of sizes. Also it could be customized to for the drain position and match with drains as required.

Note:
         1. Shower Tray can be customized.
         2. Hole can be cut to match the required drainage system
         3. Min tile size is 100*100mm

We can do totally as your size request and below are our regular one for reference

Technical Data--- XPS Shower Tray

TYCO Drainage Systems, Waterproof Sealing Tape, Washers and Screws, and other accessories, we can also supply them. Customized size is available.

TYCO: Professional manufacturer and exporter with more than 10 years experience
AREA: 25000sqm
Products: XPS & EPS foam board, under tile backer board, shower tray, underfloor heating system, etc.
Certificates: CE, SINTEF, SGS, VTT, REACH, ISO 9001, PATENT, etc
Market: Europe, Southeast Asia, Oceania, etc
Locations: located at beautiful West Lake-Hangzhou,China, very close to Shanghai and Ningbo sea port .
Directions: From Shanghai Pudong airport 1 hour by car / 45minutes by train
                      From Hangzhou International airport 1 hour by car

If you have any further question, please feel free to contact us.