10+ Years Lifetime PU Membrane Roofing Waterproof Coating
Polyurethane rooftop coating for waterproofing (2-component)
ANYDRON 2K is used as a rooftop coating and waterproofing membrane on a number of constructions such as rooftops, balconies, polyurethane foam insulation, bridges, flowerbeds, water tanks, bituminous and EPDM membranes etc.
Anydron should be applied with a roller, a brush or with an airless spray gun. Apply at least two layers of the material and the second layer should be applied within 18-36 hours.
The key features of this polyurethane rooftop coating are:
Upon curing a waterproof membrane is formed
Extraordinary resilience to high and low temperatures
10+ years lifetime
Resistance to UV rays
High elasticity enabling bridging of cracks
Cool roof properties (when using white coloured coating)
Ability to protect the surface even in areas where puddles are formed
Flexibility in adding extra coatings, patching, working on existing roofs with obstacles
Specifications
Product Name:
Polyurethane Rooftop Waterproofing Coating
Estimated Consumption:
For every layer of ANYDRON 2K expect to consume at least 0,5-0,6 kg/m². Actual consumption may be higher depending on the quality of the surface. Apply at least two layers.
When working with mesh sheets expect a total consumption of at least 3.5 kg /m2
Packaging:
Available in 25Kg, 14kg and 5kg sets (A+B) of fixed weight proportion
Colours Available:
White
Upon request grey, ceramic red, green, and black (for orders over 1000 kg)
Quality is of utmost importance for our company. The high quality of our products is the key factor when nurturing close relationships of trust and confidence with our customers.
Ktisis company is certified with ISO 9001:2000. Quality control takes place throughout the production phase of our products as well as upon completion of production and before packaging begins.
Samples of each production set are kept for a specified space of time in the company (time frame depends on the product in question). Finally before major projects are about to commence, we conduct a test application on a small pilot scale so that we can make a precise assessment of the final result.
We provide certificates of conformity for our products (CE marking) and several of our products are submitted to 3rd party laboratories for independent testing of EU standards.
