Почему клиенты из Тайваня покупают вьетнамский блок AAC панель ALC whatsapp

AAC/ ALC BLOCK

Autoclaved lightweight aerated concrete (ALC/ALC) panel are high-performance products that have been absorbed the advanced technology and application experience from Japan and European countries which it have spread over 40years development history.
ALC/AAC is made of silica sand, fly ash, cement, lime, etc. as the main raw material. It is reinforced with anti-rust treated steel bars. It is experienced the process of high-temperature, high-pressure and steam-conserved into fine porous and tightly structure concrete panels.
The AAC/ALC is light-weight, high-strength, with excellent thermal insulation, sound insulation, good fired-resistance, durability, anti-freeze, anti-seepage, anti-seismic performance, high softening coefficient, environmental protection and energy saving, low construction cost, good surface quality and good load bearing capacity. It is convenient to hang object with good hard function, and it is a new type material kind of energy saving with superior performance.

Application:

1. General industrial buildings, eg., high building, KTV
2. Residential buildings
3. Single house
4. Public construction, eg, Hotels, hospitals, schools
5. The fence of the factory
6. Kitchen, bathroom, and the toilet of indoor wall.
7. Also can paste on tiles and cement mortar.

Packing and Delivery

Selling Units:Single item
Single package size: 600X400/300/200X100 cm
Single gross weight:670.0 kg
Package Type:suitable for the sea transportation

About Eblock

Eblock is the Asian biggest Vietnam-based AAC manufacturer with Top modern factory in ASEAN (2 lines) equipped with state-of-the-art machinery and technology, that boast a total capacity to more than 400.000m3 per annum.
Export daily to more than 20 countries: Singapore, Malaysia, Taiwan, Australia, New Zealand...

Provide a complete full solution for Wall System including Blocks, Panels, Mortar, Plaster, Skim coat and other accessories.

What are the advantages of ALC Concrete Wall Panels compared with traditional brick building materials?

a.Cost effective - lightweight panels allow for reduced structural components and smaller lifting equipment.
b. Excellent thermal resistance performance.
c. Acoustic performance - effective sound transmission barrier between external and internal environments of the building.
d. Excellent fire rating properties.
e. No wet trades - less mess and a cleaner, safer work area.
f. Less wastage - significantly reduced waste as panels can be custom-made to length requirements.
g. Fewer waste bins and fewer crane movements.
h. Design flexibility - panels can be easily cut and routed to suit design requirements.
i. Panel lengths up to 6 meters.
j. Strong, secure and durable with corrosion-protected steel-reinforced panel

Ingredients:

Fly-Ash:A lot has been said about this raw material in this Project Profile itself. But this Raw material is freely available in Thermal Power plants. There are no taxes on this item whatsoever. Transportation charges are only to be attended by the entrepreneur.
Sand (65-70%): the core raw material of AAC product; the main resource of silica-aluminum components; correspond with JC409-91; the clay should less than 4%
Lime(12-20%):one of the main raw materials of fly ash AAC; the main effect is to provide efficient calcium oxide with cooperation of cement making calcium oxide react with SiO2,Al2O3 in hot water then to produce calcium silicate hydrate. Therefore, lime is also the main resource of strength. Effective calcium oxide of lime should not less than 65%, over 80% is perfect and should accord with JC/T621-1996.
Cement(8-10%): This Project aims to utilize OPC cement as main binder material. It will give faster strength to the bricks, besides giving improved consistent quality. It also ensures a better cost effectiveness for the same. Using OPC will be a standardized practice. The other prime advantages of using OPC (compared to other binders) is it's easy availability locally through nationwide Retail Network of Cement Companies.
Gypsum(1-2%):Gypsum is the foaming regulator in AAC which dispels quicklime and postpones slurry's densification.CaSO4 should be more than 70%.
Aluminum Podwer(0.074%):it is the forming agent type and recommendation for supply depend on raw materials and mix formula