Описание и отзывы
Характеристики
CNC602A Automotive fuel injector tester&cleaner 220V/110V with English panel CNC-602A for 6 or 4 cylinders Gasonline cars
CNC-602A is an advanced electromechanical product,which can clean
and test injectors by simulating engine working conditions. It can also perform cleaning on the injectors and fuel supply system on vehicle.
Feature:
1 Cleaning hard coke from injector via ultrasonic and auto electronic technology.
2 Imitate working as vehicle\\'s fuel system
3 Washable testing single-point injection as TBI, CFI, ECI and CIS.
4 Backwashing
5 Uniformity testing
6 Fog detection
7 Fuel injection quantity detector
8 Tightness test
9 Automatic cleaning mode
10 Vehicle cleaning mode
11 The minimum pulse width test
Function:
* Ultrasonic cleaning: To perform simultaneous cleaning on several injectors
and to remove the carbon deposits on the injector completely.
* Uniformity/Sprayability test: To test the uniformity of injecting amount of each injector,
and to monitor the spraying status of each injector with the help of backlight. T
his test is also for reverse flush.
* Leakage test: To test the sealing and dribbling conditions of injectors under system pressure.
* Injecting flow test: To check the injecting amount of the injector in 15 seconds of constant injection.
* Auto. test: To test injectors by simulating different working conditions.
* On-vehicle cleaning: The unit is equipped with various adaptors and couplers
that facilitate cleaning on the injectors on vehicle.
Specification:
* Power supply: AC220V±10%, 50/60Hz;
* Input power: 250W;
* Ultrasonic cleaner power: 100W;
* Simulated RPM range: 109990rpm; step: 10rpm;
* Time range: 19999s;
* Pulse width: 0.525ms; step 0.1 ms;
* Fuel tank capacity: 4700ml;
* Dimensions: 385mm×410mm×500mm;
* Weight: About 35kg
Support Model:
Audi,Australia Ford,Benz,BMW,Brilliance,Chevrolet,Chevy,Chrysler,Citroen,
Dacia,Dadi,Daewoo,Daihatsu,Demo,Fiat,Ford,GM,Holden,
Honda,Hyundai,Isuzu,Jaguar,Kia,Lancia,Land Rover,Mahindra,Maruti,Mazda,Mitsubish,Nissan,Opel,
Peugeot,Porsche,Renault,Romeo,Rover,Saab,Seat,Skoda,
Smart,Subaru,Suzuki,Tata,Toyota,Volvo,VW,Yamaha
CNC-602A injector &cleaner tester package list:
1 x CNC602A Main Machine
201020068 6-cylinder fuel distributo kits
103250005 Crescent plate
103250006 Press plate bolt
103250014 Adaptor for fuel top-supply injector
103250028 Stopper for fuel distributor
103230107 Adjusting pole for reverse flush
103250007 Knurled nut
103250008 Pressing screw
103250013 Adaptor for fuel top-supply injector
103250015 Swiss thread adaptor for fuel top-supply injector
103250016 Coarse thread adaptor for fuel top-supply
104990012 BUICK injector adaptor
103250018 Hexangular stopper
105020217 pulse signal connection cable 1. Be used for the connection
of special injector, T=0.5
105020218 pulse signal connection cable 2. Be used for the connection
of special injector, T=0.8
103260037 Ultrasonic cleaner
103250017 Reverse flush adaptor
101020131 6-cylinder Injector pulse signal cables
104130024 Lots of different O rings