Поставщик Flexspot Amazon на подъемном столе с регулируемой высотой

Changteng was established in 2013, and now our aim is to be top 3 in the moving office furniture & system. 

This four-floor factory assembly area is 2,500 square meters per floor. Factory open space: 4,000 square meters. Office area: 500 square meters per floor, totally four floor. Injection workshop area: 1,250 square meters. Hareware workshop: 2,500 square meters. 

Our customers are all over the world, we have the certifications of CE, FCC, SAA, GS and etc.

Operation Specifications Of Hand Controller: 

1. UP or Down: Press up “∧” key / Press down “∨” key. 
2. Set memory 1: Press the button “S” to show “S-” ,then press 1, or any key like 2,3, 4. 
3. Mm and inch switched: Keep pressing the “S” key for 5S. 
   4. Set the height limit: Pressing the up “∧”key to the desired height, press up+down in 5S, indicates that the S-H is successful. 
   5. Set the lowest limit: After pressing the down “∨” key to the desired height, according to press up+down 5S, indicates that the S-L is successful. 
   6. Miniment height desplay postion: Keep pressing key “S”, then press up“∧”, the lowest desplay value is increased 1 by 1. Press the down “∨” key, the miniment desplay value is reduced 1 by 1. 
4. Touch barriers auto springback: With high anti-collision load rebound. 
5. Reset: After the system move to the minimum limit, pressing the down key 5S, until show the RST, release the down key, then press down key to confirm and start to reset.