Поделиться:
Waterproof Mini Size 500M Wireless Range Remote Control Smart Led Light Smart Home Wall Electronic Switch
The switch can not be used alone, should be with the wireless receiver as a set :1 switch +220V receiver
1 receiver can connect with up to 8 switches .
For Mini size , only 1-gang is available . if need 2-gang ,3-gang ,may contact us
Parameters of Wireless Switch SW-K1 | |||
Dimensions: | 75*48*15 | mm | |
Waterproof Rate: | IP54 |
| |
Installation Method: | Dual adhesive tape of 12mm or screws | ||
Operating Voltage (Battery Type) | 2.0~3 (CR2032) | V | |
Wireless Parameter | Frequency | 433.932 +/-75KHz | MHz |
Wireless Range | Outerdoor≥500M;Indoor≥50M | M | |
Panel lifespan | ≥600,000 times |
|
Parameters of Receiver (SW-R02) | ||
Dimension (L*W*T) | 39x23x22mm | |
Installation Method | Dual adhesive tape of 12mm or screws | |
Voltage | AC 150~275V | |
Frequency | 433MHz | |
Power Output | Resistive load | 1800W |
Inductive/Capacitive load | 1200W | |
Max Intergraded load | 1000W | |
Hi-pot test | highly resistance for 3 hours of 380V high voltage, even 5KV HV flash impulse | |
Sensitivity | -116dB | |
Mechanical lifespan of relay | ≥400.000times | |
Current of relay | 10A |
Q:Can i only by your wireless light switch ?
A: Wireless switch must be programmed with receiver as a ket for application .
Q: Can i print our brand and logo on the switch?
A: yes , silk priniting or laser engraving is available
Q:Is the Maxcell CR2032 easy to buy in the market ?
A:Yes , quite normal battery type in the market .