60 см светодиодные дневные ходовые огни для автомобиля с последовательным потоком сигнала

Описание и отзывы

Характеристики

60CM LED DRL Daytime Running Lamp Strip Light for car with Sequential Flowing Turn Signal Function

 

• 100% brand new and high quality.


• High power LED daytime running lights(DRL),


• Elaborate design, good structures, 100% waterproof, easy installation, energy saving.


• Function: White Daytime Running Lights / Yellow Turn Signal Lights (Flowing Water Model Light)

2 x 60 CM Super Slim Strip Tape Lights (without the Controller)

 

Type	Daytime Running Light + Turn Signal
Light Colour	White+Yellow(Turn Signal)
Thickness	3mm
width	15mm
length	60cm
Turn Signal Light Model	Flowing Water
Voltage	12V DC
Watt	20W
Wire	3
Length	60cm
Cable Length	45cm
Main Material	Soft Silicone
Placement on Vehicle	Front, Left, Right
Water resistance	Yes.IP65
Function	White Daytime Running Lights / Yellow Turn Signal Lights (Flowing Water Model Light)

 

 

Function description:

White and amber flexible soft LED Strip Light for car.
Application: Angel eye, headlight turning light.
Ultra bright White LED lights to be used as daytime running lights and flowing Amber Yellow LED lights to be used as turn signal lights.
Can dress up the headlights similar to the new style.
Waterproof-both for interior & exterior of car use, simply installation.
Note: This item can NOT be folded or bended in a large angle, or it will broke the LED beads.

 

 

• 2 x 60cm CM Super Slim Strip Tape Lights (with Drive box)

 

Cuttable:

Easy Installation,no need to take the headlight assambly apart,simply stick it to the gap between headlight and bonnet.
Cuttable,there is a cut port every 3cm from the end,u can cut any length u need.
LED with long life expectancy, low power consumption, energy saving.
Get the unique look and outstanding impression.
Transparent housing for brighter light.
Soft strip tubes, bending freely.
Enhance lighting in rainy and foggy days to avoid traffic accidents.
When switched to yellow colour, it can be used as turn signal light (Flowing Water Model Light).
Easy to install.
Note: Turn signal lights Light up in flowing sequentially.

Wires Connections:
Black wire = Negative
Red wire = White light, Connecting to headlight or ACC+
Yellow wire = Yellow light, Turn Signal Lights (Flowing Water Model Light)

Installation Notes(Must be tested before installed):
Not a plug and play product, some professional skills or tools are needed.
Can be cut as your need .
Can be bent but cannot be folded or beat arbitrarily, the LEDs inside will be damaged.
Need to open the brake cover for installing.