Индивидуальная упаковка косметических трубок для мягкой трубки с винтовой

Screw cap for the round tube. The Plastic flip top cap has 2sizes, can fit the tube for #40,#50. Screw cap for 150ml shampoo tube ,repair cream tube ,100g calming mask tube and 120ml facial cleanser cosmetic tube and 180mlbody wash tube ,and also 200ml tube. The normal Plastic flip top cap just in one mould,when the cap and the tube are installed,many times there are cases where the cap and tube positions are not adjusted properly.With our flip cap,this not going happen.Our flip cap is made of 3 parts.The tooth cap, the middle cap and the top cap.With this design, the middle cap and the out cap can be rotate to erery angle,so it is easy to adjustment the top cap with the tube.3 parts withh 3 mould ,so the cap can be in 3 colors.Just depend on you need.

3D Printer

After the new design is completed,we can make a 3D mold to check up whether the design is ok or not.

3D scanner

It can quickly and accurately scan product data, help the designer improve product design information.

Computer servo stripping tester

The product can be tested for various properties, and get the data more accurately and intuitively.

Mold grinding production 

The operator will debug the machine according to the design manuscript and fine grind the product mold.

Mold grinding machine

The operator simply enters the corresponding operation instructions, the computer will work with the machine and make perform fine grinding.

Mold storage area

All molds are stored on the shelf and each molds has a detailed form.It can easy to check up the use condition and the state.

The injection workshop has 35set injection molding machine,and also work with 35set manipulator machine at the same time.24sets plastic side material shredder to smash corner material at the same time as production.So that the corner material can be recycling at once.The injection products are transported directly on the conveyor belt for inspection,after inspection, the products will be assembled in the assembly workshop.

Injection molding machine

Total has 35sets injection molding machine,divided into 3 teams,can produce and operate simultaneously.

Manipulator machine

Each injection molding machine is work with a manipulator machine,more efficient and stable quality.

Plastic side material shredder

Smash the corner material and put it back into production,product is delivered from the conveyor belt to the inspection.

Assembly line

Workshop planning is clear and tidy, all employees must wear hats and dust clothes.

Hot stamping line

Total 14set hot stamping machine, printing the products as the  customer requirements.

Ultrasonic welding machine

24set ultrasonic welding machine. More effective to improve production efficiency, reduce personnel input.

Product inspection line

All final products must be inspected.

The unqualified products will be pick up,and will be dust treatment.

The carton packaging

The products are arranged in layers by the plastic supports.And also with the plastic film and plastic bags.

The product's detail mark

At last,each carton will has a product's detail mark.

Raw material storage

After the quality inspection,the raw material will be storage by category.

Injection parts storage

The injection product parts will be stored  after passing the inspection, waiting to be arranged for assembly.

Product Storage

The final products will be stored according to the ording No., waiting to be sent to customers.