Поделиться:
Mechanism: | CAPD347 | ||||
Printing method | Thermal dot line printing | ||||
Dots/line | 576 dots/line | ||||
Dot pitch | 8 dot/mm | ||||
Paper width | 80 mm | ||||
Printing width | 72 mm | ||||
Paper thickness | 54~78 um | ||||
Printing speed | 170 mm/s | ||||
Paper feed direction | 180° horizontal | ||||
Sensors | Head temperature | Thermistor | |||
Paper press shaft | Mechanical switch | ||||
Paper end | Photo interrupter | ||||
Paper loading | Easy loading | ||||
Font size | ASCII:9*17;12*24; Chinese: 24*24 | ||||
Power supply | Logic circuit | 4.75~5.25 V | |||
Motor | 21.6~26.4 V | ||||
Dimension (L*W*H) | 119.45*96.13*80.60mm | ||||
Weight | Approx 2.18 kg | ||||
Reliability | Circuit: over 1,000,000,000 pulses Cutter: over 7,000,000 cuts Thermal head: over 100 km MCBF: 37,000,000 lines | ||||
Ambient environment | Work temperature | -10 ℃~50℃ | |||
Work humidity | 20~85% RH | ||||
Storage temperature | -25℃~70℃ | ||||
Storage temperature | 10~90% RH |
Controlling board: | |||
Interface | RS-232 /USB/Parallel | ||
power supply | DC 24V/2.5A | ||
Command set | ESC/POS | ||
Barcode | supported | ||
Firmware location | 512KB Flash memory | ||
Buffer | 32 KB | ||
SRAM | 64KB (extra) | ||
Driver | Parallel/USB driver | ||
System | WindowsXP/Win7(32bits or 64 bits)/ Win8/Android/Linux OS | ||
Accessories: | Sensors | paper near end sensor; | |
paper jam sensor; | |||
dragging paper sensor; | |||
Paper holding unit | |||
Paper guide mouth | |||
Interface connector | |||
Power supply unit | |||
Cable |