Полиуретановое водонепроницаемое кровельное покрытие высокотемпературное водостойкое на водной

SEPNA PU110 is one component self lelveling polyurethane based coating that cures by reaction with atmospheric moisture to form a seamless but flexible waterproofing membrane.

-Single component, convenient to apply
-High cohesive force and ductility.
-Resistance to chemical corrosion, low temperature.
-Anti-aging performance better than cement based polymer sealant
-Low voc, eco-friendly

Tools preparation: clean tools including saw toothed plastic scraper, brush ,plastic drum, 30kg electronic scale,rubber gloves and shovel knife.

Application environment requirement: sealant should be installed in the cleaning condition at 5~35°C relative humidity 35~85%RH.

Cleaning substrates surface:substrate should be solid without loose materials; dry without construction on the wet substrates; clean without dust ,oil,asphalt,tar,paint,wax,rust,Non-Permeable agent,curing agent,release agent and film etc. It should be cleaned by wiping out,cutting,polishing,

sweeping,washing,scrubbing and blowing.

If large cracks on the substrate surface,the cracks should be filled by sealant ,and filled surface should be scraped as the same level as coating. After surface curing depth reach up to more than 3mm, the coating can be appiled on the joints.

The first coating application: first ,brush the wall corner and pipe joints partly ,then using saw toothed plastic scraper to knife-coating in large area. It should require homogeneous without too thick, the thickness of layer should be 0.5mm in general(If too thick, coating layer is easy to emerge bubbles ).

The second coating application: after the fully curing of the first coating layer (about 12 hours),

then knife-coating homogeneously at the second time. The good thickness of the second coating is 0.7mm.The direction of knife-coating should be vertical with the first direction of knife-coating. Please refer to the first coating application in details.

The third coating application: after the fully curing of the second coating layer,then knife-coating homogeneously at the third time.The direction of knife-coating should be vertical with the second direction of knife-coating. Special instruction: the the times of knife-coating should be confirmed based on thickness design of coating, the total coating thickness is 2.0-2.2mm.

Protective layer construction: if needed, protective layer can be applied on the surface of coating layer.

Cleaning tools: dip the tools in methylbenzene or dimethylbenzene(prohibit it strictly to dip in ethyl alcohol solvent), the tools can be used after cleaning the solvent. If long time not be used , it should be washed by alcohol or other organic solvent. The cured sealant should be scraped and teared off.

Shanghai sepna Chemical Co.,Ltd is a professional industry adhesive supplier ,manufacturing polyurethane/silicon/epoxy sealant and adhesive,has nearly 15 years history.
In 2005 sepna introduced PUNADE technology from Switzerland.
Via the ISO90001:2000 certification.
In 2013 sepna introduce Drawing Machine technology and has put it into producing formally now.

Sepna has professional factory which area is 8,500 square meters,and has 138 staffs,including more than 20 technical and R&D staffs.

Application Field :
Electronics, Industry, Aviation, Automobile, Ship,Building,Rail vehicles, Power, Medical, LED, Semiconductor, New energy,etc.

Production Concept:
Perfect performance;Utiliy;Natral;Advanced;Development;Economic;

Distribution:
Sepna's products have been widely used in the international market, mainly in North America, South America, Asia, Southeast Asia Middle East and Oceania,etc.Until now,she has serviced nearly 1000 enterprises all over the world.
And new product is being Researched and Developed more and more.

Q: What's your delivery time?

A: Normally, the delivery time of sample order is 3-7days
Bulk order is 10 days after received the PO and deposit.

Q: Can I get samples?

A: YES! Usually one piece 600ml Sausage or 1kg tin free sample supplied for your quality check.
Three ways to get free samples below
1. Supply us your import express account DHL/Fedex for sample shipping.
2. You can inform your DHL/Fedex to pick up the sample from Sepna factory.
3. Pay express fee to Sepna company by Paypal or TT, we will arrange the sample delivery on our side.

Q: What is your MOQ?

A: Our MOQ is 1000pcs 600ml Sausages

Q: Can you do OEM lable for the products?

A: YES, the OEM service such as buyer labels are accepted as long as your order reach our standard amount.

Any more questions, please contact us anytime!