Портативный беспроводной вакуумный насос Mikata миниатюрный поворотный лопастной с литий-ионным аккумулятором 18 В постоянного тока 5 0
- Категории: >>>
- Поставщик: Wenling,Yangyi,Mechanical,And,Electrical,Products,Co.,Ltd.
Поделиться:
Описание и отзывы
Характеристики
Product Description
The battery how to charge
Technical Data
Why choose us
Oil change procedure
①To ensure that the pump is in a hot state, the pump needs to run for about 1 minute before changing the oil;
②Open the air inlet at the same time as the pump is running, so that the oil in the pump cavity is forced to flow out. Close the switch to stop the pump and then open the drain plug to discharge the waste oil and dispose of it properly;
③When the oil stops flowing, tilt the pump body to completely drain the remaining waste oil;
④Tighten the drain plug;
⑤Open the trap and add new pump oil
⑥ Cover the air intake cap, check the oil level after starting the pump for one minute. If the oil level is below the lower limit of the oil level, slowly add oil to the normal oil level, and then screw on the trap.
②Open the air inlet at the same time as the pump is running, so that the oil in the pump cavity is forced to flow out. Close the switch to stop the pump and then open the drain plug to discharge the waste oil and dispose of it properly;
③When the oil stops flowing, tilt the pump body to completely drain the remaining waste oil;
④Tighten the drain plug;
⑤Open the trap and add new pump oil
⑥ Cover the air intake cap, check the oil level after starting the pump for one minute. If the oil level is below the lower limit of the oil level, slowly add oil to the normal oil level, and then screw on the trap.
Phenomenon
After-sale
Safety warning
In order to avoid personal injury, please read carefully and follow the instructions in the operation manual. wear gloves when working with refrigerant;
Do not contact refrigerant directly to prevent personal injury caused by refrigerant;
Z series vacuum pump is strictly prohibited to extract flammable, explosive and toxic gases, and it is strictly prohibited to work in the environment with flammable gases (such as R32, R600a, 1234yf, etc.)
In order to ensure the safety of the product, please select the manufacturer's original accessories and charger (lithium vacuum pump);
Do not disassemble, open or cut battery pack, keep away from heat source or direct sunlight (only with lithium battery vacuum pump)
Keep the battery clean and dry. Do not continue to use in case of damage or discharge (only with lithium battery vacuum pump)
Do not extract corrosive or chemical reaction gas with pump oil;
Do not use in the rain, the product body is easy to cause electric shock due to water inflow;
When the battery is discharged, please turn off the power switch immediately after it is put into the protection state. It is forbidden to start frequently, which is easy to damage the battery and shorten the battery life.
Do not contact refrigerant directly to prevent personal injury caused by refrigerant;
Z series vacuum pump is strictly prohibited to extract flammable, explosive and toxic gases, and it is strictly prohibited to work in the environment with flammable gases (such as R32, R600a, 1234yf, etc.)
In order to ensure the safety of the product, please select the manufacturer's original accessories and charger (lithium vacuum pump);
Do not disassemble, open or cut battery pack, keep away from heat source or direct sunlight (only with lithium battery vacuum pump)
Keep the battery clean and dry. Do not continue to use in case of damage or discharge (only with lithium battery vacuum pump)
Do not extract corrosive or chemical reaction gas with pump oil;
Do not use in the rain, the product body is easy to cause electric shock due to water inflow;
When the battery is discharged, please turn off the power switch immediately after it is put into the protection state. It is forbidden to start frequently, which is easy to damage the battery and shorten the battery life.
Maintenance and repair
1. The selection of pump oil type and state is an important factor to determine whether the pump can reach the limit vacuum. In order to maintain the best performance of the pump, we suggest that you use a vacuum pump oil with low viscosity, which is conducive to the cold start of the pump.
Note: when the pump oil is emulsified and polluted, please change the vacuum pump oil in time.
Note: when the pump oil is emulsified and polluted, please change the vacuum pump oil in time.
Shipping and Delivery
Southeast Asia | South America | Southern Europe | |||
Port | Ningbo/Shanghai/FOB/CIF/EXW/CFR | ||||
By Sea | 4-5 days | about 30 days | about 25 days | ||
By Air | 1-2 days | 1-2 days | about 4 days | ||
FAQ
Похожие товары
Новинки - Розница
