KASHIYAMA SP-500/SP500 части пневматического 31500-0001 крыльчатки DJ насос 08-17-1201 VOLVO D34A-MT ОСП

KASHIYAMA SP-500 Jabsco 31500-0001 Impeller DJ Pump 08-17-1201 VOLVO D34A-MT  JMP 9100

Specifications:

Blades: 12

Width: 101.5mm

Diameter: 128mm

Shaft: 36mm

Drive: Spline Drive

Material: The strongest marine and chemical corrosion resistant metal alloy and scientifically engineered high performance neoprene rubber.

Condition: New

Use: Cooling Systems (Water)

Features:

Oil, acid and alkali-resistant, water-resistant, wear-resistant

Replacement:

Jabsco 31500-0001

Volvo D34A-MT

JMP 9100

Kashiyama SP500

DJ 08-17-1201

The flexible impellers are subjected to rigorous quality processes to ensure reliable, efficient and long lasting performance. 

Replace all impellers at least once every year, or sooner, depending on the engine duty. When the installation is correct an impeller may last for several years, but it is always advisable to stick to a schedule of preventative, rather than corrective, maintenance.

Replacing impellers is easy. By removing the end cover screws, it is possible to remove the impeller by using either a Impeller Removal Tool, or channel lock pliers, to grip the hub of the impeller. Don't use screwdrivers as they may damage the face of the pump body, causing leaks, and they can be dangerous in confined spaces.

Always carry spare impellers on board in case of emergency. The impeller is one of the most vital components of the engine cooling system and should always be treated as such.

Always grease new impellers. Firstly, it makes it easier to install the impeller into the pump bore, and secondly it gives added protection to the impeller during initial prime. After replacing the gasket and end cover the pump is ready to use.

CustomIzed rubber impeller and any shape rubber parts are available