Закрытый плотно копать уголь песок гидравлический поворотный корпус раскладушка захватной ковш для
- Категории: Grapples >>>
- Поставщик: Henan,Kino,Cranes,Co.,Ltd.
Поделиться:
Описание и отзывы
Характеристики
Product Description
Digging Coal Sand Hydraulic Rotary Shell Clamshell Grab Bucket For Excavator
The excavator shell bucket (shell grab) is tailor-made according to customer needs, and there are two types of hydraulic swing and without hydraulic swing;
The shell-type grab without hydraulic rotation adopts the oil circuit of the excavator bucket cylinder, without additional hydraulic valve block and pipeline;
A set of hydraulic valve blocks and pipelines should be added to the shell grab with hydraulic rotation, and the oil cylinder is equipped with a piston protection device.
The shell-type grab without hydraulic rotation adopts the oil circuit of the excavator bucket cylinder, without additional hydraulic valve block and pipeline;
A set of hydraulic valve blocks and pipelines should be added to the shell grab with hydraulic rotation, and the oil cylinder is equipped with a piston protection device.
Product Advantages
* Suitable to Clam Shell Grab Bucket sand,coal,grain, slag,scrap.
* through beam is shortened,high strength,light self weight.
* main shaft sleeve is of bearing steel, Pin shaft material is 40Cr.
* High temperature resistant bearing for pulley.
* Knife edge plate adopts wear-resisting steel plate,adopts multilayer sealing craft.
* Dirt proof and water proof and it could be underwater operation.
* Clearance of two knife dege plate is very small,0.3mm,good sealing, keep working site clean.
* Whole structure is strong and not distortion,good sealing.
* through beam is shortened,high strength,light self weight.
* main shaft sleeve is of bearing steel, Pin shaft material is 40Cr.
* High temperature resistant bearing for pulley.
* Knife edge plate adopts wear-resisting steel plate,adopts multilayer sealing craft.
* Dirt proof and water proof and it could be underwater operation.
* Clearance of two knife dege plate is very small,0.3mm,good sealing, keep working site clean.
* Whole structure is strong and not distortion,good sealing.
Specification
Model | LDRB8 | LDRB15 | LDRB15 |
Excavator(T) | 5-10 | 13-16 | 20-26 |
Pressure(Kg/cm) | 180 | 210 | 250 |
Flow(L/min) | 190 | 210 | 220 |
Capacity(m³) | 0.3 | 0.6 | 1-1.5 |
Weight(T) | 360 | 560 | 1200 |
Company Introduction
Contact Us
Похожие товары
BONOVO ковши грейфера экскаватора
US $1000-$9000
BONOVO захватное ведро/Грейфер для бумажного изготовления
US $1000-$9000
Новинки - Розница
