Ortur лазерный Master 20 Вт станок с ЧПУ для лазерной резки и гравер машина дерева стекла пластиковая гравировки
- Категории: Laser Engraving Machines >>>
- Поставщик: Shenzhen,Salon,Technologies,Co.,Ltd.
Поделиться:
Описание и отзывы
Характеристики
Products Description
Recruiting agents![]()
Our logistics advantages:
Spefication
* ✅ New eye protection design→ The laser protective cover perfectly protect our eyes when working. Without wearing goggles,
people around can watch laser engraving.
* ✅ Advanced firmware→ Ortur laser master firmware, smarter, faster, more accurate and easier to use. Professional motherboard
with 32-bit MCU. It can preprocess 32 instructions, support up to 921600 baud rate, more powerful. The engraving speed can be
as high as 3000mm/min. (If the laser engraving result is not considered, the moving speed can be as high as 1000mm/s).
* ✅ Excellent safety protection→ There is a G sensor on the main board, if the machine detects unauthorized movement, the laser
beam will stop. 2: If your computer system stops or the USB cable is disconnected, causing the laser engraver to stop
moving,the laser beam will stop to prevent fire. 3: If the laser engraver is under control, but the user forgets to operate and
keep the laser beam working, if the motor stops moving, it will cut off additional safety to prevent fire.
* ✅ Wide compatibility→ The 7W laser engraver can be compatible with various mature engraving software, such as LaserGRBL,
LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAc system (LightBurn), engraving file format
supports NC, BMP, JPG, PNG, DXF etc.
* ✅ Excellent safety protection→ There is a G sensor on the main board, if the machine detects unauthorized movement, the laser
beam will stop. 2: If your computer system stops or the USB cable is disconnected, causing the laser engraver to stop
moving,the laser beam will stop to prevent fire. 3: If the laser engraver is under control, but the user forgets to operate and
keep the laser beam working, if the motor stops moving, it will cut off additional safety to prevent fire.
people around can watch laser engraving.
* ✅ Advanced firmware→ Ortur laser master firmware, smarter, faster, more accurate and easier to use. Professional motherboard
with 32-bit MCU. It can preprocess 32 instructions, support up to 921600 baud rate, more powerful. The engraving speed can be
as high as 3000mm/min. (If the laser engraving result is not considered, the moving speed can be as high as 1000mm/s).
* ✅ Excellent safety protection→ There is a G sensor on the main board, if the machine detects unauthorized movement, the laser
beam will stop. 2: If your computer system stops or the USB cable is disconnected, causing the laser engraver to stop
moving,the laser beam will stop to prevent fire. 3: If the laser engraver is under control, but the user forgets to operate and
keep the laser beam working, if the motor stops moving, it will cut off additional safety to prevent fire.
* ✅ Wide compatibility→ The 7W laser engraver can be compatible with various mature engraving software, such as LaserGRBL,
LightBurn, support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAc system (LightBurn), engraving file format
supports NC, BMP, JPG, PNG, DXF etc.
* ✅ Excellent safety protection→ There is a G sensor on the main board, if the machine detects unauthorized movement, the laser
beam will stop. 2: If your computer system stops or the USB cable is disconnected, causing the laser engraver to stop
moving,the laser beam will stop to prevent fire. 3: If the laser engraver is under control, but the user forgets to operate and
keep the laser beam working, if the motor stops moving, it will cut off additional safety to prevent fire.
LU2-4 | LU2-4 Compressed Focal Spot Laser Module Light Spot：0.08*0.15mm |
LU1-2 | Electric Power 7W, Luminous Power 1200-1600MW |
LU1-3 | Electric Power 15W, Luminous Power 4000-4500MW |
LU1-4 | Electric Power 20W, Luminous Power 5000-5500MW |
Baud Rate | 115200-921600（default 115200) |
Available Materials for Engraving | Wood, Paperboard, Acrylic, Leather, Some Plastic, Power Coated Metal, Coated Glass, Stone, Ceramic |
Available Materials for Cutting | Kraft Paper, Paper Board, Thin Plywood, KT board, Felt Cloth, Leather, etcs |
Computer OS | Win XP, Win7, Win8, Win 10(LaserGRBL) Max and Linux(LightBurn) |
Default Focus Length | 58$55mm(from the heat sink to the object) |
Customers comments
Company Profile
VR
Why Choose Us
Похожие товары
Новинки - Розница
